How to soundproof a wall from the neighbors with their own hands.
Noisy neighbors can be a serious problem that can affect both the mental and the physical health of the household. Sometimes peace and quiet return to his apartment possible only with the help of wall insulation from neighbors.
Most often used for this purpose carcass sound insulation technology. It can perform well with your hands. To do this, you must know the features and the correct sequence of milestones. On them will be discussed below.
Soundproofing walls are starting to prepare the surface. It is necessary to remove her the decoration (wallpaper, paint).
Then, to create a framework plot the layout, using a laser level.
Along the perimeter of the walls fasten the guide profile, which is pasted before installing damper tape.
Expose rack profile with a pitch of 40 cm and put on his layout for mounting direct suspensions in increments of 50 cm.
Then, with the help of dowel-nails, focusing on the markup, is attached directly to the wall hangers.
For alignment in one plane between two extreme profiles rackmount profiles stretch the strong thread.
According to her expose rack profile and fasten them to the straight suspension.
The frame is ready. Getting soundproofing installation. To do this, measure out the size and cut the special acoustic plates 10 mm larger than the pitch of rack profile and install them with a slight preload.
After laying insulation skeleton sew up sheets of drywall.
The result is soundproofed and wherein the flat wall ready for final finishing.