Installation of drainage of the finished roof: tips

How to install drains, if the roofing is already paved - review of recommendations from users FORUMHOUSE

The absence of the roof on the roof cover residential building - this is nonsense. But his presence at certain stages of construction can also bring a whole bunch of problems.

Imagine a situation: the construction of the house came to an end, evroshifer, shingles or metal profile is created reliably hid all the rules roofing pie. At this stage, the future tenants are satisfied with the result, but pets have already chosen for themselves favorite places. The only thing that confuses - the premature onset of cold weather and, as a consequence, inability to mount a gutter system (at least - in the current construction season). There's your first problem. It can eliminate the spring, you can - next summer, but avoid its decision to the owner will not work.

Today let's talk about how to properly mount the gutter system, if the standard process the sequence for whatever reason was broken, if the roof is installed before were installed watercourses.

The article will be answered the following questions:

• In some cases, the gutter system has to be installed after the installation of the roof?
• How to manage to mount the gutter without removing the roofing?
• What methods of gutter installation in the presence of roofing are considered the most reliable, and why?

For what reasons have to mount the gutter after the installation of roofing materials

Situation number 1: The decision to mount the gutter system after the installation of the roof covering is justified only in one case: if it is provided construction project. It happens quite rarely and all answers questions of builders in this case gives the used construction technology.

Situation number 2: the roof still intact and, apparently, can last even a single year. What can be said about the drainage system, which is already rather worn out, and in some places gives abundant flow. This situation is also not uncommon, but out of it often requires unconventional solutions, because dismantle already operated roof - a more expensive (it can be, quite simply, ruin).

Situation number 3: and finally, the unjustifiable, but internally, this approach becomes due to force majeure.

nik11666

Member FORUMHOUSE

A team of pickers put the house of laminated veneer lumber. Money for the spillway and its installation no longer exists, but I asked the foreman, that they should make preparations for their future installation. As it turned out, because of the design features of the eaves gutter hooks to fix standard methods is not possible.

As can be seen in the photo, roofing material (in this case - is evroshifer) issued too much beyond the cornice, which does not allow to attach the hooks to the drains even wind board.

In this case it was decided to remove the spotlights (disclose eaves bottom plane) and attach the gutter hook directly to the rafters. This is the first way to install gutters on the roof, the roof covering.

Installation of drainage system of brackets to the rafters

We continue to consider the situation depicted in the photo. Even if it were possible to raise the roofing material (as in the case of evroshifer is fraught with additional losses), use the extended brackets would not have worked for the drains. Too much overhang of the roof would not be allowed to make any effective results, so users roman29 It was offered an honorable way out.

roman29

Member FORUMHOUSE

If possible, gently remove the lining, performs the role of the spotlight, revealing thus the rafters. Then you take your metal bracket, find the bar 50 * 50 mm and a length of 50 cm, to it using screws to fasten the bracket. Next, the operation is repeated (as the rafters, as well as bars and brackets). The next step is taking all this construction (with bracket and bar) and fasten the bars with screws on the side of the rafters. Is screwed to the left or to the right (as better and more convenient), but not the top and bottom! Attention! This method I describe in case if your arms are parallel to the rafters. If not, bend them to the desired angle. And observe the required slope angle with an ordinary rope, I always do.

View from below is supposed to be about the same as another participant dialogue.

Marffino

Member FORUMHOUSE

I did just that. As a result, the drain wintered, and given the slope did not led.

 But how was the look house with green roof of evroshifer after installation brackets to the rafters and the installation of drainage system.

Alternatively, the side surface of the trusses can be mounted with brackets curved legs (chute holder side). In this case, you can do without the support bars.

But if the roof overhang too advocates the truss system, such brackets will not help.

In some cases, suitable lateral gutter bracket with curved legs.

But the feasibility of such a solution is determined, again, again, individually.

Installation on fascia board brackets

Ignorance in matters of defect processing sequence is not, but leads to a dilemma.

links

Member FORUMHOUSE

And what about in the case of already installed shingles? On the front board advised not attached. Now I need to make vodostochku, and next year the facade and spotlights.

Yes, the option of installing the brackets on the front board, quite frankly, "so-so". Abundant rainfall creates in this case a heavy load not only on the gutter system, but also on the wind board, which is fraught. However, some people (at your own risk) it is used in practice.

If there is no other alternative, brackets gutter system installed on board the wind. But anyone who has dared to take this step, to take care of giving the structure more strength.

TrizhdyPapa

Member FORUMHOUSE

The main thing - to check how well the fascia board is attached to the ends of the rafters. If the hardware is normal, vodostochku can hang it safely. If it keeps on thin black self-tapping screws 50-70 mm, then I would have previously replaced them with more powerful mounting (on galvanized screws of 4-5 mm to 90 mm in length). If screws thickness of 5 mm, the board must first drill a hole to a piece of wood is not cracked.

Brackets gutters, as we know, there are plastic and metal. Controversy over the plastic on the portal pages are "fierce".

VldimirV

Member FORUMHOUSE

I do not deny that the plastic is attached to the front board, but it is wrong by definition. The fact that the rigid fixation of the plastic is fundamentally unacceptable - especially in the Russian climate. Poor ventilation front board in place the bracket will cause rapid loss of stiffness and appearance.

Easier to just pay attention to the metal brackets.

PETRUZZIO

Member FORUMHOUSE

A little bit of my "collective farm" art gallery. Fascia board 20-ka.

Installation brackets mounted under the roof covering

If the status and characteristics of roofing allows without too much trouble to weaken or remove his attachment to mount the gutter hooks will be easier and safer to the upper crate. This fully corresponds to the classical technology.

driver13579

Member FORUMHOUSE

Vodostochku not delivered immediately, as the stage of the project, as well as at the stage of its implementation has not turned out to dive into the benefits of the material and choose the manufacturer. But now I can tell you about how I was able to mount a vodostochku already installed the finish of metal roofing. Here is a brief sequence of actions:

• bent hooks on the company kryukogibe;
• end plate removed and unscrewed screws on 3 sheets (to a depth of 3 waves);
• take a backup of the lining and placed it under the metal;
• screwdriver + adapter angle drive screws unscrewed and removed Cornice strip;
• ordinary knife + wide chisel in the eaves board did slots for hooks with 600 steps;
• set the hook;
• Set back Cornice strip and took out a backup from under the roofing sheets.

After performing these activities roofing sheets have been fixed with new screws, screwed into the old holes.

If you wish to repeat the experience of the user driver13579It is desirable that the new screws have a larger diameter.

In details a unique user experience driver13579, and practical experiments other members of our portal can be read in the appropriate forum thread. About, how comprehensively prepare the house for the rainy season, Read our article. A short video will cover the basic elements of the drainage system, and the nature of their connection and installation.

Subscribe to the channel. Share in social networks. Join FORUMHOUSE!