How to collect multirozetku own workshop

If you are a beginner radio amateur, you probably have encountered (faced) with such a problem as a at the same time, and most importantly, easy connection of various electrical appliances (soldering iron, BP, reading lamps etc.).

Some use an ordinary power strip, but it is not always convenient. I suggest you to make a reliable and high-quality multirozetku, through which you can connect various electric appliances and you will have the opportunity to turn a comfortable - off.

Why you need it

Some of you may well ask: "Why should I bother and do something, because you can get a power strip or bathe." So, the answer to this question, I want to say that the surge protector is not always convenient, and here's why.

Sockets in the filter are made under the Euro plug, but we have many homes is still a lot of electrical plugs with the Soviet model.

By turning off the switch on the filter, you are de-energized it completely, which can also be very convenient. In multirozetke will be provided three toggle switches, with which you can disable, for example, a soldering iron and leave the lamp. You do not have to constantly pull the plug from the socket to disconnect the separate device. As they say, lazy engine of progress.

Also in multirozetke breakers are provided (in the network protection filter only in a varistor), which greatly increases the safety of operation and in the event of a failed experiment, the installation will be de-energized as quickly as possible and the rest of the wiring of your home will unharmed.

We collect the necessary components

So, in order to collect our universal socket with us you will need:

1. Base. I will use the remainder after repair a piece of plywood sheet.

2. Two sockets units: one with the grounding contacts, and the second without.

3. And a separate electrical outlet without earthing contact.

4. Three two-position toggle switch.

5. Two circuit breaker and boxing for them.

6. The feed wire PVA.

7. Collapsible plug.

So, after all of the required components are assembled, you are ready to assemble.

Assembling multirozetki

So, first of all based on power strips and have a box for submachine guns.

After that, we choose where will be located our toggle switch with you, and determine with the method of attachment.

Now we proceed to the outlet connection, but before that necessarily compress the ends of the cores, as this is necessary to ensure proper contact.

And only then proceed to the connection socket strips.

Now connect through tumbler phase conductor and zero to directly connect machines.

Now we have to connect the socket and secure the decorative cover.

All our multirozetka with you completely ready to use.

As you can see turned out pretty versatile and practical, and most importantly, the most secure general purpose socket.

If you liked this article, then put his finger up and thank you for your attention!