What can be drawn from "unnecessary" things.

People living on their own land, are well aware that the zealous owner all goes to the cause, and the so-called Construction waste can be turned into a lot of useful things. In skilled hands cutting boards or beams, remaining after the construction of the house, old or broken tools and beushnye tires - excellent foundation for anything necessary on the farm. The story behind the building of life hacking FORUMHOUSE users.

In the case of wood:articles made of boards with their own hands

Pallets remaining from the aerated concrete can be found in 1000 and one method of application. And we proved that our users are guided by the principle of "throw away or burn always have time, and the thing in the economy will come in handy."

Sergey Dyachuk (User FORUMHOUSE):

In life, it happens that much money, but a lot of ideas. On the site there is always the use of so-called waste materials. I had an idea - to make from old wooden pallets drovnitsu to the country.

user of land goes down heights. Therefore trays except Polents storage function, serve as a fence, when filling winter wood, protecting from giving extra views.

Well blown drovnitsa made as follows: 2 pallet stacked horizontally on special supports, installed in stages, taking into account the reduction of the relief areas. Then, on this base, the pallets are placed vertically and gets ready section.

All the user has turned 6 sections. It remains only the top upright wooden pallets mount "overlap" to put any roofing, and fiscal drovnitsa ready. As far as it is functional, the user says in his commentary.

Sergey Dyachuk:

Obtain and cheap, and convenient. Firewood remain dry. They almost engulfing the rain, except at the bottom.

Besides drovnitsy, Sergey Dyachuk, pre-disassembling pallets on board, made of them at the cottage gate. The design is so well blended into the site, which gives the impression that there was "a cowboy" input. Also, the board of the pallet went on a pergola.

And it's only a couple of ways to use pallets. See more how to use the old board in the country and in the house.
Of them can make a budget bed.

Assemble the box.

Workbench.

Or, taking pallets freed from under the concrete blocks, put them on the scaffolding-wood from which masonry work carried out, and thereby, reduce the purchase cost of the boards.

This is what Viktor Borisov, nickname portal victorborisov, actually built a stone house "a helmet."

victorborisov (User FORUMHOUSE):

To assemble the forests I used wooden pallets left over stacked blocks.

Such ersatz forests are going very fast. Only need to purchase a dumb boards and screws or nails for nailing horizontal ties and flooring. In addition to masonry work, scaffold of the trays come in handy when working on a site or finishing decoration, plastering. Another advantage of this hack - beushnye pallets do not mind to slap a solution and you can leave with a light heart in the street for the whole winter.

If the wooden pallets - a real universal and almost finished product, with dozens of ways to use the bar and the board, the remaining After construction, the perfect material for any home worker - a person who wants to "an inexpensive" to make furniture or beautiful objects interior.

What to make of the old boards

hagenuk76 (FORUMHOUSE User):

Anyone who has built, knows that at the end of the works are from the waste materials used. of wood thrown into the oven often, I used the pruning logs for furniture.

Churbachki cut into pieces, ground, and milled plane and fit in one size and color of paint residues, was used as the legs under the bed. These are the products turned out.

 That's what happened in the end.

To stem not scratched parquet, carpet glued to the bottom.

Cooked frame of the metal corner, construction pulled bolts tightened as flooring remains of a floor board and finally polished.

At the user's words, the design was very strong, and most importantly - cheap, because for the construction of the bed are just using what is literally strewn under the feet. The main thing - to show imagination and think about what can be done from the "unnecessary" material.

The most interesting is that the user did not stop, and after a while, acquiring board and buttons added to the bed makeshift back. The total cost will not exceed 8 thousand. rub.

Also interesting is the bed of the waste from the participant portal Pavelroma.

This is the stool of an old oak stump of Alano.

It was

It became

And out of the formwork from the remnants of furniture Lutsenko.

Lutsenko (User FORUMHOUSE):

This furniture I made at the price of screws and paint. The impetus for the creation of these products have become commonplace - the money after the construction of the foundation run out and relax on the porch like a new comfort. When only 2 more weeks to pay, how to do something from what is at hand, the uptake is very fast.

An inventory of materials left after dismantling the formwork, the user decided that from the remains of timber 10x10 cm, boards 150h25 mm 100h25 mm, with concrete and traces of fastener holes as well as paint, varnish and screws, can be built excellent furniture.

For its manufacturing it requires the following tools:

• A circular saw;
• Electric jig saw and planer;
• Grinder and roller for painting.

Moreover, entering into the taste, Lutsenko decided that, in time to equip it with homemade pillows, and that's what happened in the end.

To all who are interested in the seat, the exact dimensions of useful products.

• The height of the railing to - 600 mm;
• The height of the seat to the plane - 320 mm; Rear seat height of 270 mm is indicated by the yellow arrow;
• The height of the railing between - 650 mm;
• Backrest height - 450 mm.

What can be done from b / a metal

Beushnyiy metal, along with a tree - an excellent material for making the right in the household things. We only need to approach the matter with the invention.

Oleg Novitsky (User FORUMHOUSE):

My wife has long dreamed of a gazebo on site. Do it out of something cheap and flimsy I did not want, and buying expensive material - there is no possibility. I began to think of what to build reliable, durable and beautiful gazebo. He broke his Majesty the case.

Member portal accidentally found out that according to the rules adopted in Moscow, installing and removing advertising structures themselves must "advertisers." Oleg Novitsky went to one of these companies and talk to the driver, I found that take metal for recycling them - troublesome. According to the rules before disposing of the metal must be removed all the lights and plastic parts. As a result, the user has agreed to the advertisers that for 1000 they rub him bring the car b / y of steel structures without dismantling.

Assembling the gazebo with use of metal advertising structures was not very difficult. First colored triangular truss, then pre-assembled upper arbor part, dug rack and installing the upper part of pavilions, covered her slate. On skate went old galvanized iron. The assembly was carried out on the bolts.

Inside arbor hung decorative lights.

Oleg Novitsky:

All about everything has gone 15 thousand. rub. Of these, 8 thousand. rub. - is on the tile costs, sand + his delivery, slate, board, lights and paint with hardware.

An interesting point: in the manufacture of the foundation under the glasshouse user, in addition to running a promotional metal structures, used the following life hacking.

Greenhouse stands on the pier foundation, made of b / u of brake disks from SUVs (obtained for free in the service station) and scraps Polyethylene gas pipes with a diameter of 16 cm, also cast free gasman, because it is unnecessary pieces left after the laying of the main pipeline.

If we approach the matter with the invention and ingenuity, you can get virtually free construction material that you will be happy to give: b / a car tire with a tire center and etc.

What can be made of old tires

The first thing that comes to mind, what you can put tires - to make the foundation for the light frame houses or outbuildings. This type of base has proven itself on the wetlands, what in detail in the article foundation of automobile tires.

Wiktar (User FORUMHOUSE):

I bath tegmental stands on the foundation, as well as a barn, toilet, greenhouse is now even finish. And Bath 3 years of use does not jam even a millimeter.

But it is - only one of many options. In addition to the foundation of the tire can be made for the drainage pipe, to use them for decoration portion or manufacture of flower beds.

To make a garden "vase", you need to cut a tire. To do this, take an electric jigsaw, put sawing wood with a fine tooth saw blade or metal, but it cuts more slowly and strongly heated. Planned line, a hole is drilled under the saw blade 10 mm and begin to cut.

Of tire rubber can be spectacular sculptures to decorate the area.

denisoff11166 (FORUMHOUSE User):

I saw a swan out of tires and lights up to make yourself the same. That's what happened in the end. The time it took only half a day.

Kraynov (User FORUMHOUSE):

For ease of use, jigsaw rubber tire sawing, a saw may be periodically submerged in oil.

And my husband and I made of old tires crocodile!

Crocodile done so: cut electric fret tire kindled "skins" on the ground and cut the circuit. Having made a wooden frame, begun to form the body.

Tire fastened by means of screwdriver planting rubber on screws, which are longer where shorter. Scales stuck on superglue. For sockets have bulbs.

How to make the right of unnecessary

Each master found in the garage or hozblok old, unwanted or broken tools. We have already talked in detail, both of rubbish to make the necessary in everyday life tools and accessories.

A user with the nickname of the portal OnlyOn I made of simple plastic canister which is popular among professional plasters tool. It - pneumatic hopper bucket.

Such hopper buckets, in fact, represent a small plastering and greatly simplify the process of plastering walls, especially when large quantities of finishing works.

OnlyOn (User FORUMHOUSE):

To speed up the application of the plaster, I'm out of the canister and the blower pistol made a bucket-hopper.

In fact, to make adjust, took 15 minutes. The basis used b / a canister out of the motor oil. User washed her bottom cut and drilled a hole in the neck with swirling lid diameter of 10 mm.

Then the knife made a longitudinal slot in the handle and put the gun to purge the nozzle into the hole and the body of the slot handle.

Screwing the gun to handle binding wire, OnlyOn the resulting tape wrapped assembly.

That the solution did not get into the pen and without weighing hopper bucket, holes drowned pieces of foam.

For air used 24-liter compressor. Upon completion of work necessary to rinse the bucket with water and purged to the dried pieces of the solution, it resumes normal operation, do not hit the wall and did not let the line when broaching rule on beacons.

And at the end of the material - a variant of a garden sprayer Shturmtruper, made from an old garden, and vacuum cleaner conventional flexible liner for water.

The device resembles a weapon out of a science fiction movie and, at the user's words, gives a "Torch" to four meters, without the formation of mist.

On FORUMHOUSE has a theme, which is assembled Kaleidoscope ideas on manufacturing cost and useful tools. Masters "all hands" will be useful topic about rework, repair and restoration of hand tools. Also we advise to study the topic, showing manufacturing nuances of homemade machines.

woodwork lovers Ballroom drawings universal folding goat. read, how to make hand-armaturogib and how to put a fence for 1 dayWhich will cost only 10 thousand. rubles.

The video look budget ideas for Homebrew and life hacking for those who are going to their own hands to build a frame house.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!