From the heart! Bed from a bar with your hands for friends

All brilliant - easy! And this truth confirms bed of timber and a few boards left over from the construction of the house

The most expensive gift for best friends, the newlyweds - a large bed of timber, made their own hands. From the heart, and with best wishes. According to the new posts and the author of this article, ElenaKis, The couple were thrilled! After all, this furniture is made just a masterpiece, original, with high design elements and, most importantly, with the soul! But the store is such beauty would cost a whole bunch of money!

Content

• Materials and tools for homemade bed
• Preparation and assembly
• A bed in a rustic style for Elena

Materials and tools for homemade bed

Started manufacturing of timber beds. That's what we need to do:

• 4 segment unprofiled wooden bar 150x150 mm (2 shorter, depending on the carcass height + mattress, two 60 cm longer for the head) for the frame and the head.
• 2 simple planed boards 200x50 mm length 100 mm mattress + stud.
• 2 bar 50x50 mm for the length of the mattress.
instagram viewer
• 9 planed boards 150h40 mm for the width of the mattress (2 sidewall 6 log under the mattress 1 to the head).
• 1 Unedged the width of the product.
• Rope.
• Antiseptic impregnation on wood for the water-based treatment of all surfaces.
• Self-tapping screws.

Also need tools:

• Hacksaw on a tree.
• Drill.
• Screwdriver.
• Cylindrical drill bit (Forstner drill bit) on a tree.
• Brushes.

Preparation and assembly

Boards for preparing the bed, too, with their own hands. Preliminary all the details of future bed of timber and paint the boards lessirovochnomu impregnated wood. After performing this type of work on both ends of the long boards 200x50 mm cut spikes 50 mm to construct was more durable. Accordingly, the size of the spikes, the bars in the grooves do. You can use the cutter, but if not, then a good option would be a simple drill Forsnera.

On both sides in the unedged board, the top one of the short sidewalls and bottom crossbar headboard drilled round holes for decorating rope.

At the ends of the crossbar headboard, as well as on the long side walls, spikes, and do the corresponding slots in the 2-longer-rack bars. For a long sidewalls screwed bars 50x50 mm for supporting lag.

Now proceed to the assembly: 2 long sides and a headboard on the tongue and groove with pillars and legs bed, 2 short sidewalls are screwed with screws to the rack feet. Further should be put on the bar joists 50x50 mm and then fasten them to the frame, rigidly fixing lugs in place to prevent their deformation. Decorate the head of simple edging board and ropes (note that new posts anywhere else does not use glue, only screws used for fixing). Everything! The design of the original back is ready!

A bed in a rustic style for Elena

The same principle was made and comfortable "bed" for the family itself ElenaKis. Just as the leg was used lumber of birch trunks. bed exploitation during the year showed excellent results and should continue to show it. Wood is an ideal material for furniture products in the bedroom. Reliability and comfort are guaranteed!

Learn more about these homemade products - in the subject line, toRowan of timber, One of the materials - a selection of home-made wooden beds in different styles. And for relaxation in nature - exclusive lounges and armchairs. In the video - how to make garden furniture, and at the same time free from the garage of junk.

Subscribe to the channel! Share on social networks! become members of FORUMHOUSE - the most "skillful" national portal of the building and country life!