Large and comfortable table of cool stuff with their hands

In recent years, profound changes have occurred in the interior design: the place of luxury and frills came austere minimalism and functionality. This approach is at hand diy, because now making furniture even easier.

More recently, all bought their computer desks, which were more like transformers because mass of small details, a large number of shelves and drawers, few people would do this by their hands. In our time, this table has ceased to be functional, since computers began to take place little more than a smart phone, paper storage media is slowly but surely moving to an electronic format, and write in such a table is inconvenient, because the space is left few.

What table do we need? With a large work space that could accommodate all the gadgets and, if necessary, writing instruments, with a beautiful, aesthetic décor, light and mobile.

What we need for such a table?

1. Slab material. It can be anything: laminated wood, plywood, chipboard, MDF.

2. Hand-held circular saw.

3. Sander.

4. Construction foam.

5. Aluminum corners, screws, screwdriver for fixing.

As the slab discovery material will Eurolight plate is simple: two sheets of 10mm chipboard joined honeycomb cardboard. To him the edge needed, you can come up with something of their own.

Napilivaem countertop podstole of two parts, which will be on the edges of propping up the table top, jumper. Worktop depth of 70-80 cm is optimal. The height of the table should be 70-80 cm, 75 cm standard. The length of the table top in each case has its own, I have 2.1 m. The top and legs in the junction Scrollsaw 45 degrees, if the saw allows, if not, can be joined and at right angles.

Council: before saw cut chipboard cutting saws have to draw a line of Stationery knife, so there will be less chips. After sipped polished slice, so we will achieve beautiful, practically saw factory.

Jumper set for rigidity, behind them will have two. Scrollsaw rectangle 20 cm * 2.1 m (Length countertops), remove the cardboard from the inside. We have 2 pieces of chipboard. At the foot of the table Scrollsaw slots for jumpers, fasten screws.

The base of the table is ready.

On the tabletop and a base at the junction inflict foam, connect part.

Slightly biding, whereupon strengthening aluminum compound inside area, the wider the better.

If you take the edge from the manufacturer, it is easy to stick with the help of iron, cut off the excess with a knife stationery.

The result was a large, beautiful table with a beautiful finish. It's comfortable for them and nice to work and relax, watching a movie.

p.s .:My HouseHe is trying to give you the most important, useful information. If you liked the article, please put "like".subscribe to the channel - in front of a lot of useful and interesting information!