What is anti-magnetic seal and why it is put on the counters
The fight against the theft of electricity is constant and one of the ways to prevent unaccounted consumption of resources is to install anti-magnetic seals. In this article I will talk about how to protect such as the antimagnetic filling about how it works, and why not even try to better remove it from your counter. So, let's begin.
Why put such steel seals
The reason for the installation of such seals rather banal: recently quite popular so-called neodymium magnets, which are due to the strong magnetic field can stop the counting mechanism. In opposition to these powerful magnets were created and anti-magnetic seals.
How they work and how they work
Thus, anti-magnetic seal - a rather complicated device that consists of a sticker in which the adhesive includes special small particles that change their original position or state under the influence of a strong magnetic field.
There are many modifications of such seals (and is constantly coming up with new), but they can be divided into two broad classes:
1. film seal. They are a normal label, but it is worth it to bring a strong magnet as its color immediately changes from a light shade to a dark. It may even appear any inscription while.
2. capsule filling. In this embodiment, the product is present in the middle of the transparent bulb inside which is a small ball dark color of special material. As soon as it is served up a strong magnet, then the ball will collapse and turn to dust.
Also, if you try to carefully remove the seal such, it remains an indelible mark on account of the instrument, who very eloquently controller will indicate that such a seal tore off, or tried rip.
Is it legal to the installation of such seals
The consumer may be a logical question, but based on what I have set a seal? Am I a suspect?
No, it does not mean that you are in any way included in the list of unscrupulous taxpayers. Just a federal program aimed at reducing the theft of resources across the country. And representatives of the Criminal Code (management companies) or public utilities operate under letter of the law, namely the Russian Federation Government Resolution dated 06.05.2011 (as amended on 03.27.2018)
"On the provision of public services to owners and users of premises in apartment buildings and residential in paragraph 81.11 as follows:
Why not try to disrupt these seals and what penalties it provided
So, we have you figured out what the magnetic seal and the purposes for which it is established. Now I want to tell you why it is not even worth trying to disrupt it and what fine you for it may prescribe.
1. Do not attempt to disrupt the seal and then carefully glue it. These seals are arranged in such a way that when you try to pull them evenly separated and the inner pattern is separated by a special algorithm. Thus, part of the adhesive layer remains on the account of the unit and will remain part of the label, and if they wanted to back you're not stuck by her, that was not that noticeable. Just at ungluing most of them it starts to be visible inscription of the "excavated" and t. N.
2. If you think that heating with a hair dryer will help it separate, then too wrong. When you try to heat, most modern sealing simply just change their original color. By the way, as they react and quenching.
3. Setting duplicate seals. If you somehow managed to get a new unspecified seal, you should not rejoice too soon. Each seal has a unique identification number that is recorded in the act during installation. When checking the controller can simply checking the number, identify fraud, and, respectively, and the fact unaccounted resource consumption.
What is the penalty
So, if the controller when the next inspection revealed damage to the protective seal, in this case it will be an official act and recalculated the energy consumed.
This calculation is executed with the installation of such a seal, but no more than three months preceding the test, which revealed a violation, and up to the date of the complete elimination violations. Moreover, the resulting amount of energy that will be calculated for this period is multiplied by the boost ratio equal to 10.
That is, as such, there is no specific penalty will be recalculated and all will be increased ten times and this has increased the amount will have to pay.
conclusion
Anti-magnetic seal rather successfully protect metering devices from the stop counting mechanism, so do not try to stop the counter, which is set such protection. After all, even just an attempt (slight damage to the seals) will be regarded as an act of theft controllers and you will have for their only try to pay a pretty decent amount of money.
If the article was useful to you, then you finger up and repost as possible in the social. net. Thanks for attention!