Overview of ceramic soldering iron with replaceable tips firms Sumsour

I ordered this unit online Aliekspress because fascinated by electronics, bought musical Tesla coil in flat packed, and as besides the good old soldering iron with a thick non-replaceable tip I had nothing, I decided to solder all of them. Namuchavshis, but still collecting unit firmly decided: I need a tool with replaceable tips. And I have appeared in my mailbox firm soldering Sumsour a temperature controller and replaceable tips.

The order came in the Stavropol region of 11 days, in the conventional yellow packet with one layer pupyrchatoy polyethylene. The kit also entered except for the soldering: a set of interchangeable stings pretty shaky stand and sponge (porous rigid sponge to clean the tip).

The stated technical parameters are soldering iron:

The total length of the soldering iron - 185 millimeters.

Cord length is equal to - 143 cm.

Operating voltage - 220 IN.

power - 60 Tues.

As active iron has a temperature adjustment within a 200 before 450 degrees Celsius. Here let us check whether the stated parameters of the real.

Soldering quite comfortable in his hand, but that's just a microscopic regulator to review written on it the temperature you just need one hundred percent vision.

After switching on the network, I decided to check the temperature of heating the tip with a thermal imager, but then there was confusion, is the measurement limit of our unit was equal to 150 degrees Celsius.

Anyway, the point is reached and the temperature is clearly above it. Digging a little in the bins found multimeter with thermocouple and decided to test it with the help of the temperature indicator.

I got the following results

Of course, about the absolute accuracy of the measurement on the multimeter, and it does not go, but the thermostat is working and even applied the figures you can set the desired temperature.

After the first turn all spray wires (made of it is not clear what material) just burned, and it looks now as.

Although the trial is successful soldering, but I'm still going to order a set of pure copper stings.

conclusions

So, what can I say about this Palniki: with his immediate task it copes, but the quality of pressed leaves much to be desired. I was pleased with the purchase, because it is well suited to my humble inquiries.

If the article was useful to you, then place the thumbs up. Thank you for your attention.