Useful content

The popular model of the sofa in the style of "Loft" with his own hands

click fraud protection

In recent years, gaining momentum in the fashion style of "loft" in the interior design. Furniture in this style will fit into any interior due to its versatility and rigor. Popular sofas that because of the simplicity of its design, you can easily make your own hands from the remnants of building materials.


For the sofa, we need:


1. Board, I had Edged, we buy natural moisture, until the house was built, it was dry.
2. Trimming the sheets RSD 12.5 mm, the house was taken for plating.
3. Foam, we stayed on the floor insulation.
4. Trim fabric.
5. Foam.
6. Faux.
7. Skobnik and staples to him


First you need to assemble the frame of the sofa. The length of each chooses one that he needs, we have a 4 m. Seat depth advise you to do more than the standard models, to make it easier to sit or to use as a bed. I have a depth of 1 m.


Do height 45 cm, so it is convenient for adults and children can comfortably climb up on the sofa, do not need seat next each time.
Backrest height of 90 cm.


The board used 150 * 50 * 100 mm and 50 mm, for the power frame is best to put it on the end face, rather than laying flat, since the load is distributed evenly, and increases the strength of the product.

instagram viewer

On the carcass sewn sheets of OSB, creating the foundation of our couch. We try to take more sheets to reinforce the frame.



We stayed trim foam, which we stuck to the OSB on the liquid nails, so we do sofa softer and more pleasant.
Tighten tissue, which is not a pity. Sofa is already possible to use, which we did.


The armrests were made later, as it turned out, without them very uncomfortable.



But we did not stop. I wanted to make a beautiful and soft.
Put on the seat of the sofa foam thickness of 10 cm, 7 cm at the back, armrests obtyanuli thin foam thickness of 1 cm, put on it that it is possible, at the same time it is soft.


At the hardware store we found a material such as imitation leather. Looks like a pretty expensive skin, is very cheap.



The color range is limited, but the basic color is.
Slipcover sofa partially sewn partially nailed stapled to the frame.
The result was a great sofa in the style of "Loft".


See also:

Overhaul of the kitchen (total clearance was selected in green)

Why I decided to "revive" this chair?

PVC panels for kitchen apron - a quick and cost-effective solution

Subscribe to the channel, the only way you will be informed of new publications - in front of a lot of new and interesting information!

p.s.: We try to give you the most important, useful information. If you have been interesting and helpful place "like".

Gazebo of your dreams

Gazebo of your dreams

It is said that the first step on the way to a dream start with its visualization. Then close you...

Read More

Features roof system in wooden and stone houses

Features roof system in wooden and stone houses

It is said that the roof of the house - this is the fifth facade. Any owner of a country cottage...

Read More

Technologies wooden frame housing

Technologies wooden frame housing

Until recently in our country frame house was poorly developed - basically everything was done o...

Read More

Instagram story viewer