Construction budget hozbloka: personal experience

Cabins, a barn, hozblok - is the first thing to anyone during the development of the plot. It is not surprising that with the beginning of the construction season of our portal among users increased interest in the topic dedicated to the construction of "saraek". As practice shows, do a good shed can be, even without building experience and knowledge acquired in the future be used in the construction of a large house.

We have already mentioned, how to build a simple and reliable foundation for the shedSo in today's material will tell how to build hozblok size of 4x6 meters.

Pankrat1975 (FORUMHOUSE User):

In the summer of 2015, due to financial problems, I had to freeze the construction of their own home. So I decided to help his brother with the construction hozbloka, where one could throw things and tools from an old barn, which we have decided to carry.

It should be noted that Pankrat1975 to the construction of cabins had no construction experience and, looking ahead, we will show that it was the result.

On the construction of hozbloka (almost alone) our user has left about a month, because often there was a rain, which greatly complicates the construction. Nevertheless, the result was worth the effort.

As with any construction, erection hozbloka started by defining its size. Pankrat1975, radium-saving building materials and minimize scraps of boards, proposed to limit the size of 3x6, but his brother needed a workshop. Finally, after much deliberation, we decided to build hozblok size of 4x6 meters.

Once came warm days, the work has begun to boil. First of all, clear the site for construction. They demolished the old barn and removed trash.

Then we do a breakdown of the foundation. To this end, aside from the neighbor's fence 1.5 meters, hammered at the corners of the site reinforcement pieces, pulled the cord, and brought right angles to the foundation has not turned in a box.

For more information on the nuances of the base layout can be read in the article, how to mark the foundation under the house.

Further, for the future foundation augers drilled holes with a diameter of 20 cm, a depth of 1.2 meters.

You acknowledge that such a foundation under the shed redundant. But because Localize elevation difference and slope, the height of the rear pillars to give 40 cm, while the front are almost flush with the ground.

For formation of square pillars above the ground was made of formwork boards 15h1.5 cm. Boards were attached to each other by means of screws 2 pcs. on one face. This is done so that a collapsible shuttering it easier to shoot from the pillars. In the future, the same formwork Pankrat1975 plans to use in the construction of cabins on their site.

poured foundation samomesnym concrete prepared in a concrete mixer. For strength in every hole proburonny advance inserted reinforcement cage, welded from three rods "tens" in length by 1.2 meters.

After the concrete stiffened, columns removed from the formwork, and by a simple bubble level and the laser level tested top posts. The difference does not exceed 3 mm.

The next stage - the construction of piping under the shed.

Pankrat1975

Until the concrete to set, I went to the local construction market, has studied price and bought the board.

Piping went on timber 150x150 mm 6 m in length, and frame strut - beam 100x50. It is worth noting that the user wrote in detail all the construction costs, which helped to keep track of cash.

Strapping beam gash groove at the ends into the groove and secured together by means of screws and stiffened corners. For greater strength at places timber compounds were drilled hole wooden Chopik made of cuttings from the squeegee.

Pankrat1975

Average beam connected the same way as the corner, the groove in the groove, fixing on corners by screws, crackers and Chopyk. I think we overdo the number of fasteners. Brother joked that the cabins do not get wood, and metal.

Tying jumper made of two scraps of lumber, which is also connected to the groove in the slot and secure the long screws. To enhance the top node after selecting 2mm wood, metal nailed toothed plate (MW).

Under the beams, for each pole, Pankrat1975 laying collapsed several times roofing material, each layer promazyvaya divorced mastic. To protect against rotting beams, as well as all bought the board was "the soul" is impregnated with antiseptic composition.

After manufacturing binding to it floored. It went to the board 100x50 mm.

Then it's time to collect the skeleton. The assembly started from the rear wall. To rise after the wall fell, it temporarily secured mowing of the slab.

Walls were collected on a "platform", the support frame on reinforced corners-screw on the screws.

To connect the frame elements is better not to use the so-called "Black" chromate screws. Because of their fragility, it is necessary to increase the time a little twisting force on the screwdriver, and the screw cap flies off.

Also, the "black" (phosphated, oxidized) screws can not stand the shock and shear configuration. If the assembly of the frame and use the screws, then yellow (galvanized).

"Correct" skeleton going on nails, without the use of screws and metal parts, since fasteners in the frame works for offset / slice (which fit the nails), and the screws work best on White Castle.

Cutting boards went on the jib.

Podnyavchetyre walls, the brothers started to manufacture roof, which established the rafters. Crate on the roof went 15h2.5 board cm.

Pankrat1975

Front Rafter we cut plumb. Rafter is attached to the metal corners. Next lay roofing material, steel sheet and threw tightened its roof screws. Now you can continue to work on the cabins, ignoring the rain.

Before lining the external walls timber imitation on the frame advance attached wind-water-proof film. Because hozblok will neuteplonnym, vapor barrier on the inside is not intended.

At this stage, the work went more cheerfully, and hozblok purchased finished appearance.

It remains only to insert windows, doors, paint the board and add a little decoration in the form of carved architraves.

Pankrat1975

In my opinion, cabins failed. Backwardness is only make-pristupku porch and decorative lights hang on the wall. shed can be insulated, if desired. Currently have will build a shed the size of 4x10 meters. I want to divide it into three parts: a workshop woodsheds and storage for storing different things needed on the farm. Only the roof do not want to lean-and complicated - like a gentle slope on the two sides to the front pediment.

The total budget for the construction hozbloka, from purchasing for screwdriver bits, drills, water level, cutting discs for grinders and ending acquisition of metal products, cement, reinforcement and the boards was about 56 thousand. rub. A detailed estimate of the construction can be found in topic "Construction hozbloka 4x6. Summer 2015 ".

Studying FORUMHOUSE threads can be found, on a better fixture to collect karkasnik: nails, screws againstand how to learn to choose screws.

In our articles describe the right cake framing walls and are advice on the construction of pile-foundation rostverkovogo.

And you can see from our a movie, how to make a house comfortable cabins For year-round

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!