How to secure the cable to the wall and look at ways technology

Everything in the world is growing rapidly, and we have long been accustomed to all sorts of elektrogadzhetam. And they, in turn, require a reliable supply network. To know the problems during your wiring, it is necessary to competently approach to its construction, and in particular qualitatively fix the wires on the walls of the house. In this article I will tell you about modern and time-tested methods of wire attachment.

The most convenient way of fasteners

Depending on which installation method you choose in your own home, and will depend on the type of fixture wires.

In case of selecting the hidden process cabling is necessary to fix the wire quality, in order that it does not interfere with further repair.

When you try to open the process of laying elect catches the most inconspicuous to a not to attract attention.

Even the choice of fasteners directly follows from further repairs. For example, if you chose the Armstrong ceiling system, and route the cables pass through it, there is no absolutely no need to lay wires in Stroebe, because it is hidden and it will finish.

Cooking equipment

So, for laying cables, we may need: hammer, screwdriver, drill and possibly a hammer.

dowel clamp

Now let's go over specific types of fasteners and start with the anchor clamp. Working with him pretty easily. For sure, we need to fix the wires in the wall drill hammer drill hole 6 mm, then unfold the collar, put back the cable and already closed clamp squeezes into the drilled hole.

All the wires are attached. Such collars are found in two forms: a round wire and a flat cable. Ideally suited for the holding of a single conductor in Stroebe, and just on a concrete wall, and yet it is quite cheap.

spider deck

This type of fastener is a compact platform a rectangular or square shape with lugs for collars and a central hole for the dowel nail.

These molds are fixed easily as concrete, and in the tree (using screws), so as great advantage is considered the availability of attachment of a group of wires, which significantly increases the packing speed all wiring. But they are not suitable for cutting grooves.

Special plug for clamps

This type of fastener is a kind of hybrid of conventional dowels and screws, thus made of plastic. Mounted just in the drilled hole puncher, and more in vdevaem conventional eyelet clamp and fix the conductor.

Nothing special and remarkable not stand out against the background of devices considered above.

Dowel to secure the cable tie

This is a truly universal means of fasteners, which are called masters: clamp with nut.

Active gadget is made of two parts: directly from the dowel and tie itself.

Is it very simple: compressed two parts, these should then fixed by a specialized paper clip for. Finished tie looks like this:

Installation is as follows: hammer drill hole, insert the dowel fixed pounding plastic peg and anchoring cable clamp.

Cable tie with a hole

But the most standard cable ties in the stores it is possible to buy here are upgraded clamps. Mounting is also very easy: make holes for putting the plug back and fix screed screws. The disadvantage of this method is a single attachment, that is, if you will need to remake the hardware, you'll need to use a new clip

Bracket for wall

Now let's consider the aforesaid fasteners, can be very useful approach for laying cable on the already made repairs.

This type of fixture love cablemen, since such a plate easily fixes the wire on plastic tree. But it is worth remembering that the bracket is not suitable for fixing the wire on the concrete.

metal bracket

But this fixture usually fix the cable laid in a metal sleeve. Just as they are reusable, because you can simply unscrew the clamp and bracket use elsewhere.

plastic clips

Designed for fixing the wires laid in a plastic sleeve. Easily attached to concrete or wood and using them simply to shape the road abreast cables

homemade fasteners

And the last review of fixture view will be the good old homemade. After all, if there is no one kind of store performance, the hardware can always be done personally. For this we need: our savvy, wires and pieces of dowel screws.

Cut wire into pieces of 3-10 cm (length depends on the thickness and number of reported data wires), and if a double wire, the break through its middle softwood

If he is single, then form a loop around the head of the screw.

rice

This fixture does not give in magazine-samples, just remember, it is better to use a single-core wire. Since multi-core will not give such a fixation hold the wires.

In addition to the pieces of wires is allowed to use absolutely any available material, such as metal strip is quite descend as fasteners.

That's all I wanted to tell you about ways of fixing the wires on the walls or ceilings of your home. Thanks for attention.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]