Useful content

Why frequently burn LED bulb

click fraud protection

If you burn the most ordinary incandescent lamp, we did not hesitate, just take it and throw out, do not even think of the reason why it happened. But the thing is changing this situation if they begin to burn out LED lamps, because they are more expensive than conventional bulbs, and if they are replaced frequently, then it will fly in circular penny. Let's see where lie the causes and how.

poor quality products

The most important reason for the frequent burnout is a very poor quality of the product itself. After all, we all want to buy a product as cheaply as possible. And it is a trap into which we catch our favorite Chinese manufacturers. After all, they produce products without the most basic means of protection, they do not set the driver to protect the LEDs from the abrupt increase in current. For this reason, if the network takes place, the inrush current, the temperature of the working of LEDs exceeds the critical level and they just simply burned.

In addition, Chinese manufacturers have resorted to this trick, they are well aware that we are all looking for a bright light bulb with low power consumption. So they deliberately overstate the LEDs glow dangerously high by setting the capacitors and resistors is oversized. As a result, these light bulbs burn very brightly, but not for long.

instagram viewer

And another reason for burnout, onaya also stems from the low build quality - it's a bad soldering.

faulty wiring

If you are confident that the high quality light bulbs, and the problem, for example, there is only one room, for example in the kitchen, then, most likely, the problem is in your wiring.

Here you need to check the status of twists in the terminal box, powered by thereof problematic room. In addition, inspect the cartridge itself. There, you should not see any traces of melting and the more bare wires.

Also in the cartridge contacts must be clean and free of fouling.

If they are still there, then you can try to recover it by tucking contacts and purification of soot. If the cartridge condition is critical, it is best to replace it altogether.

Illuminated Switches

If you use switches with LED backlight, perhaps you have noticed that with the lights blinking light or a very dim light. It also significantly reduces the bulb life and can lead to rapid burnout.

This is the main reason for the frequent burnout Led lamps, eliminating shared in the same, you save yourself from frequent replacement LED lamps.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]

Reconstruction of a country house or villa

Reconstruction of a country house or villa

The bulk of the work on the reconstruction of the garden or holiday home due to the replacement o...

Read More

The main causes of degradation of LEDs

The main causes of degradation of LEDs

When buying LED bulbs, we hope that it will shine for a long time and will last the claimed life....

Read More

Why mow seedlings of tomatoes? Mittlaydera method

Why mow seedlings of tomatoes? Mittlaydera method

Every summer resident and gardener raises their tomatoes on the. Someone looking for information...

Read More

Instagram story viewer