Do yourself a reliable extender

So you were disappointed in the standard carrying and decided to make a reliable and powerful transport by yourself? This is not surprising, because it is often purchased carry because of the economy on the manufacturer of components often fail, and may even become a source of fire hazard. In the same article, we'll find out in detail how to make a powerful, and most importantly, reliable portability own hands for reasonable money.

Purchase accessories

The first thing we all need to buy everything you need.

We need to socket strip

PVA three-conductor wire with a minimum cross section of 2.5 square

Fork, designed for at least 16 A

the necessary equipment

So do we need: pliers, screwdrivers (flat and shaped tip), stationery knife.

So, all you need is now ready, you can begin to close the assembly.

Remove the insulation to a depth of 10 cm at both ends of our wires PVA

We clean the strands at a distance of about 1.5 cm

At one end of the wire we establish our outlet as shown in the photo

The other end should be filled in the outlet unit

For more reliable fixing ends of the wires in the terminals can be their zaludit. For this we need a soldering iron, solder, rosin.

Tinned ends are inserted into the niche and securely fix them with a screwdriver.

After spending half an hour of your time, we'll make a reliable and high-quality carrier, which is capable of easily withstand welding, grinder and any other appliance. And she left us much cheaper than if we are ready to buy goods in specialized stores.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]