Useful content

Do it yourself and enjoy: Street font

How to build on the site of a beautiful winter Hot stove heated the envy of neighbors and not go broke

Outside the city wants to mentally relax at any time of the year. Traditionally, the palm held: kebabs, sweets with piping hot from the grill, barbecue, bath treatments and swimming in the pool in the summer. When winter comes plenty of splash in the street will not work. "It is possible!" - says a user portal Pit7pitIf you build outdoor Hot Tub on the wood-burning stove.

Content:

  • How to choose the design of the font with a wood stove
  • What to buy parts and tools
  • How to build a baptismal font with their hands
  • How to upgrade the street Hot
  • How much does the construction of makeshift font
  • How to operate the Hot winter
  • Recommendations and conclusions

Hot Tub - design choice

The idea to combine business with pleasure, and build outdoor Hot Tub water from the source of the fire is not new. Such constructions are known from antiquity. For example, Japanese furako.

In addition to the health-improving effect, outdoor baptismal font decorated with a country station.

Pools put next to the house or room.

On the outdoor terrace.

Font bowl made of plastic: Polyethylene, polypropylene, with an insert made of fiberglass or wood, which is considered less hygienic.

Woodburning stove placed alongside.

Or mounted inside the font.

Internal oven, as opposed to external, takes useful volume at the baptismal font. Such a furnace is more difficult to melt and clean.
Internal oven, as opposed to external, takes useful volume at the baptismal font. Such a furnace is more difficult to melt and clean.

People prefer freestanding Hot outdoor stove.

But these fonts from the manufacturer, if they buy comes at a price. Exit - to roll up their sleeves and do their own font, as I have done Pit7pit.

User font - not cheap "toy", but at the end of the article, along with the estimate, we
User font - not cheap "toy", but at the end of the article, along with the estimate, we'll show you how to reduce the cost of its construction.

It all started with "hotelok".

Pit7pit

user FORUMHOUSE

I want to make outdoor winter font for himself and his wife. I took as a basis the old cast iron bath "Made in the USSR", weighing 100 kg. Brought it to the site. Hardly unloaded. I figured, just like that. The idea of ​​the following - to weld a frame made of metal pipes. At this podium, 4x5 m, sink bath. Underneath the stove to make the type of barbecue. Print the chimney through the podium, do not forget about fire safety and sew the design board. Next: to pour the water bath, in an oven razvozhu fire. In the water for flavor, add herbs. Going down in the heated water in the nature and Bliss, outdoors. Well, in the summer, I use a font as a mini-swimming pool and on the deck of the boards sunbathe. How do you like the idea?

User puzzled questions:

  • Will the cast-iron bath temperature differences?
  • Whether the metal will burst in the cold?
  • How to weld cast iron stove without slots, to flames and smoke went only into the tube?
  • How to calculate the size of the "stove"?

. Do not wait for an answer, that is to the street font -. A rarity, Pit7pit He built it himself, filled his "bumps and bruises" in the process.

What to buy parts and tools for self-production of winter Hot stove

In the process of "brainstorming" user declined to cast iron bath, replacing it on the font prefabricated.

If the font and build a street, then to the volume of the bowl enough for a few people.
If the font and build a street, then to the volume of the bowl enough for a few people.

For the construction of fonts Pit7pit I bought:

  • Hot 3 cube;
  • wood-burning stove;
  • shaped pipes;
  • 4 cube unedged board section 15H5 see, for covering carcass font;
  • two-inch plastic pipe bends;
  • PVC pipe with a reinforcement for the water supply from the cooler to the font;
  • collars;
  • fittings;
  • valve to drain water from the font;
  • hinges for doors to climb a podium;
  • screws;
  • drills for metal.

Also required tools:

  • welding inverter;
  • "Bulgarian" for brushing the wood;
  • Gas bottle with a burner for the burning of wood.

We turn to the production of street font.

Building a winter Hot: step by step and with pictures

Constructive in street font simple. The principle of operation in the photo below.

The water is heated in a wood stove, and circulates through the pipes naturally.

Taking as a basis for this scheme, Pit7pit He began to build. Step process:

  • The ground zaglubit vertical tubes and welded skeleton. Podium height of 1500 mm.
Fitting Technology pipes both at installation under the fence poles. Concreted them or not depends on the type of soil - heaving - not heaving. Universal version for problem soils - screw piles.
  • Frame sheathed board.
  • Boards burned gas burner to blackness.
  • Brashirovka wood grinder with a brush.
  • Wooden podium font colored stain.
Bottom visible valve to drain the water. Font drowned in the podium by half.
Bottom visible valve to drain the water. Font drowned in the podium by half.
Water is poured through the drain valve stoves. So quickly raised its temperature.
  • Benches made of wood.
Board to no longer leakproof cup screwed screws at the top of the font.
Board to no longer leakproof cup screwed screws at the top of the font.
  • Purchased finished cover.
The purchase option was better than homemade.
The purchase option was better than homemade.

Pit7pit

First I set the oven at the same level with the base font, but convection is weak. Rearranged oven at 15 cm below. Water circulates perfectly. Hoses come with a slight slope.

After installing the stove, Hot finally ennobled, and this is what eventually happened.

More photos street font.

And further.

Water in the font, for reducing heat loss from the "mirror" and fast ramp-up is heated with the lid closed.

The first sample font. October 2015. On the street - 3 degrees and strong winds.

The Hot comfortably fit four people. It can climb, and six people, but then in the font does not swim.

In a special font looks spectacular in winter.

To get the maximum pleasure from the water treatments outdoors, users are advised to take with food set - tea, mineral water, juice, and for mood - the radio.

In summer you can sit on the podium as the bridge, enjoy the site and drink tea or coffee.

How to improve the street Hot Stove

Operation font revealed 'bottlenecks', which need to be finalized. T. a. in the winter bathed mostly in the dark, Pit7pit made decorative illumination of the LED strip.

The user is encouraged to take a warm white light, it is the most comfortable for the eyes.

Another point.

Pit7pit

Two-meter hard cover manually lower and raise. So I built the roof above the font, and it has built in lifting modular mechanism.

Ready version of the roof above the font.

Canopy over the font does not interfere admire the surroundings, or the stars, and protects against rain. To lock the cover in the upper position used harnesses pins (fastener, for safety, made in 4 points).

According to the user said, the maximum temperature at which it is bathed to -15 ° C. Want to swim and at a lower temperature - decide to issue a bowl filled with water, that is, to a hose length of 30 m, prihvatyvaet frost... Exit - to throw the heating cable.

What's even better in the font:

  • Make heated hose extending from the stove font, if the street is lower than - 10 ° C.
  • Provide a slight slope to drain the font side, it's easier to wash the bowl.

Another plus font - a podium turned outbuildings. Height "sarayki" - 1.5m users store where everything that is not afraid of water: drums, buckets, garden tools, etc...

Street font: estimates, how to reduce costs, handling

according to the calculations Pit7pit, for the construction of fonts it took more than 200 thousand. rub. To cut costs up to 100 thousand. rub., fabricate its own without the use of hired labor. Or set the font of the house on the terrace, and pour the water from the hot water, not warm stove. Or reduce the size of the font, for example, take the cup for 2-3 people. The options are many.

Font like many users of the portal and they have questions.

VitalikPoll

user FORUMHOUSE

And on the wooden wall harnesses will form plaque deposits? We need to somehow handle the bowl fonts using chemistry as for the pool?

Pit7pit

No problem. Font my household dishwashing. In sunny weather, winter and summer, open the lid and dry the font.

Sergey_Sirotkin

user FORUMHOUSE

And in the winter are not afraid, basking in the street to catch a cold?

Pit7pit

Bathed for 2-3 hours. Otherwise there is no sense to bother with the filling bowl water, and the furnace fuel is t. D. Bathe and when it snows. Feels like, warming up in the font after the full steam. After swimming with difficulty dobredayu to bed and sleep soundly. I have never caught a cold while swimming in the font. On the contrary - revitalizing effect. Even in the premorbid state bathed, and is already healthy in the morning. If you do not be lazy, make a bucket or two of wormwood, or, say, fir branches, it turns aromatherapy.

observations: of user said, font, with a bath, it is better not to combine. Or bath, or swimming in the font. water temperature it controls on the sensor. Comfortable temperature - +37 - +38 ° C. Slightly more already hot. If less - it is necessary to go and heat a little stove.

Winter swimming finished, drain water from the font and from the oven.

conclusions

Hot Street - certainly not a means of basic necessities in the area. But, if there is time, hands grow from where it is necessary, while the estimate does not hit the family budget, the baptismal font with a wood stove - great for a nice time with your family and friends!

Ask the author can in the subject: The font of the old baths - adopted by the Council on manufacturing.

We recommend to read the article:

  • Jacuzzi on the wood. The user's portal along with her husband made the original font, t. N. hot tub, in the nature with a gorgeous view.
  • Secrets of installation of utilities in the bath. Samostroyschikam offer simple embodiments of the apparatus plumbing and electrical installation safe methods in the bath.
  • Closed stone gazebo - summer kitchen: Their own hands. Member of the portal shares the experience of building a beautiful and functional closed brick gazebo.
  • Furnace complex 3 1 mini-oven Russian: do it yourself. Instructions for building a universal brick oven that combines the hob, grill and compact analogue of the Russian furnace with a detailed estimate.

In the video - design rules of this Russian baths.

Subscribe to the channel! become members of FORUMHOUSE and you will always enjoy your life!

How to make a lamp for the garden

How to make a lamp for the garden

"I sit in my garden, lit the lamp. No girlfriend, no servants, no friends. Rather weak and the st...

Read More

How to make flower buds Decembrist 1.5-2 times more: a simple and proven fertilizing

How to make flower buds Decembrist 1.5-2 times more: a simple and proven fertilizing

Abundant flowering decembristDo you have a Decembrist? I have it at full speed dials buds. Even a...

Read More

Utepleplenie walls in the country with internal and external parties

Utepleplenie walls in the country with internal and external parties

Good day, dear readers. In this article, we'll discuss the insulation of the walls of my garden. ...

Read More