Useful content

As the two heroic "novokubantsa" build his "dream house" (installation of waterproofing and trusses)

click fraud protection

One of the most difficult types of work in the regeneration of the roof - the installation of rafters. Our guys did it three - husband and neighbor Sasha with his brother. Maybe, of course, and two right, but you should not, perhaps, so grub.

Rafters have the same board, 50 mm thick. The length of the rafters, it seems, has turned out 6.3 or 6.4 m. The board had to step up, to get such a length of the rafters. Overlap with building boards made 1 meter. Knocked together with nails.

All the wooden parts of our roof fastened with nails. Why not on the screws - I have no answer to it. So the man decided. I asked my husband, he said that for the roof there is nothing more reliable than a good old nail or bolt.

The process of installing the rafters was a time-consuming and quite lengthy. Extreme rafters were attached to the gable, and at the bottom - a puff. Below, from gable to gable was stretched thread, which showed a lower level of trusses. On it was fixed to the rafters tightening.

At the top of rafters simply relied on the ridge pole. Between them they are fastened later. After rafters were fully established, our house began to resemble the hut of Baba Yaga. This was facilitated by the ends of the rafters, sticking out in all directions from the top. It is a pity that there is no image that would convey this feeling in all its glory. I do not guess.

instagram viewer

Now that the rafters were fastened to the tightening was the turn of the racks. These stands will be subsequently walled rooms on the second floor.

Rafters in the photographs are arranged at random, because until they are secured at the top. Racks nailed to the rafters with nails and bongs. Reinforced metal plate fasteners.

The height of the side walls in the rooms we was very comfortable - 2 meters. This was done in order to be able to buy furniture standard. We lost a few in quadrature of the second floor, but we do not need large spaces there. During the day all the racks were installed.

After installing the rack, my husband took up connection over the ridge pole rafters. Rafters is aligned with the outstretched advance from gable to gable thread. Then my husband forged a them together with nails. The last operation - mounting rafters to ridge pole at a distance of 58 cm. The work is complicated by the fact that all this must be prodelyvat standing on scaffolding. In addition, the difficulty in the fact that the timber we - not very smooth, to say the least.

In addition to the stands, guys installed under the rafters struts. Attach them to the filly and rafters. Fixing to rafters made from scraps lining boards nails to Tightening just nailed.

Around this time, my husband was engaged ventilated bathrooms. Ventilation holes were made in the slab advance.

Samu vent pipe husband laid out the red brick. It we do not get anything. You will need to order a tinsmith "coat" and an umbrella for her. But she looks so fine. In any case, our view of the pipe is not disfigures the roof.

All works were completed with the rafters. Her husband took up his old friend - chain electric saw and cut off all unnecessary! More our roof did not look like a house of Baba Yaga.

It's time to lay underroof waterproofing material to condensate accumulating on the metal roof, does not drip inwards and flowed into rainwater. If your roof is of metal or of metal sheets, then under them will need to make such insulation. We chose Ondutis. This material is of good quality in the medium price range. While he did not disappoint us.

The film is laid, starting from the bottom edge of the rafter. To the rafters it is attached with the staple gun. Overlap each other on the rolls was about 10 cm. With this film has adhesive layer. Glue strips to each other is not necessarily (as a manufacturer of writing), but it is desirable. This will be an additional guarantee that the film will not flow. The smooth side facing for metal waterproofing. Ondutisa on top of the rafters were attached bars sheathing. These bars then was packed crate with a step of 35 cm for the subsequent installation of metal.

On our roof it took two and a small roll of waterproofing. the third roll remnant we use on boiler. Strong tension during laying of the material did not. Ondutis we, of course, not loose, but not tight, like a string. So it will not break when temperature drops. A small slack is needed to ensure that the moisture accumulates in the heart and flowed into the gutter, leaving kontrobreshetku dry.

Around the vent pipe has been made wooden crate, to which the material is fastened by a stapler. Directly to the pipe husband crepe ondutis special waterproof tape, which we bought in "Baucenter".

Ondutisa Above, husband "put" on the tube sheet of galvanized iron, so-called apron. This apron is needed in order to prevent water from flowing into the junction pipe and the metal flowing through it in the gutter. All seams galvanizing to pipe were glued waterproofing.

From possible roof rains at that time we had already been secured. I must say that the rain poured down and the next day, after the installation of waterproofing. We had to wait a few days to the board and the fabric dried out well. What can you do, heavenly office does not listen to our wishes - she has her own schedule.

On that channel everyone can share its experience in the construction, repair and improvement of your home, suburban area, send photos, tell me about your country, house, apartment. And we will tell you about my little house on the canal. Information and photos (preferably horizontal) send to [email protected]

Subscribe to the channel - in front of a lot of new and interesting information!

Enough now black leaves on "Man's Happiness": especially since it is very simple to correct the mistake

Enough now black leaves on "Man's Happiness": especially since it is very simple to correct the mistake

Do you want to admire the beautiful anthurium without these disgusting black tips of leaves? Then...

Read More

This is why you should never clean your washing machine with citric acid.

This is why you should never clean your washing machine with citric acid.

The washing machine makes each of us happy. You can't do without such a device. I just threw in t...

Read More

The neighbor could not achieve a beautiful spathiphyllum in any way: it did not bloom, but the leaves

The neighbor could not achieve a beautiful spathiphyllum in any way: it did not bloom, but the leaves

Do you want to finally make friends with "Women's Happiness"? Then a fiery fireworks, comrade ind...

Read More

Instagram story viewer