There was a smell of burnt wiring, what to do

No one is immune from this situation, especially if the house is quite old and in conducting the same work more than a decade. And if you feel the smell, it is necessary to act very quickly, otherwise it may cause a fire. In this article I will tell you what you need to do in this situation.

de-energize the room

The very first step is to immediately turn off the supply of electricity in the house or apartment. To do this, go to the distribution panel, and turn off the machines (or unscrew the cork), these should nourish your home.

After that, be sure to turn off all electrical appliances completely, these should have been included in your grid. Everything is now possible to say that the ignition wiring you have escaped. Now, what to do in the future, is entirely up to you.

You can consult a specialist who start pinging your network, find and correct the problem.

And you can also produce an audit of its own, perhaps the reason is quite petty and self-repair will be plummeting, and the call specialist will cost a decent amount.

Performs a check on their own

So you've decided to start to try to eliminate all of its own. Proceed, the smell can quite accurately determine the source of the damage, so sniff and first of all examine those sockets, switches or appliances, shared in the same area are located in strong smell.

Do not be surprised, electrical appliances also need to examine, because it is likely that the reason lies in the failed vacuum cleaner or a bread machine. As it is necessary to inspect fixtures and switches.

If using nose failed to determine it is necessary to inspect all places of connection wires.

Open the outlet and inspect the contacts, they should not have traces of melting and darkening.

Just be sure to stretch all parallel bolting. Just carefully inspect switchboard may cause odor was melting body breakers due to bad prozhatym contact.

Just be sure to open the boxes (if you know where they are located and have access to them) and inspect the stranding and wires themselves, there you do not see a picture.

And to be so.

If after visual inspection and audit of all available points, you activate the normal load in the house, and the smell was back, then immediately turn off all and call a specialist. In this case, the most likely problem is hidden in the wires here and without the use of special equipment is indispensable.

Just analyze the situation and try to remember and then there was a smell, maybe it happened as a result of the purchase of a new and powerful appliance. And your network is commonplace does not cope with its work and overheats.

If so, in which case only the replacement of the wiring correct the situation.

Just want to say a few words about the apartment buildings. There are cases, that your wiring is not being, and there are serious problems for your neighbors. In this case, do not relax, and you need to help your neighbors, because if you do not, the ensuing fire damage not only their property, but can also damage your.

How to protect yourself

Effective prevention measure in this situation is the mandatory installation of the differential machine or in addition to the usual vending machines installation of RCD in your switchboard. After the switching device is precisely designed to disable the network as a result of leakage, overheating and overloading conductors.

That's the way you should do if you smelled the smell of the wiring in your own home. Thanks for attention.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]