Hotbed of automotive disc

Ask anyone who dreams of his own house in the country with which it is associated idea of ​​the country rest and comfort? You say, silence, fresh air, the house, the flowers - yes, yes and yes again! But not only!!! As one dream... of home-fire, which would burn the fire, around which would be in the evenings and on days of home celebrations were going home, which is on the fire to come friends, and in his belly to prepare delicious food... Someone sees this hearth fireplace, some stove-Swede, some gazebo with barbecue and barbecue, and some, like our new posts Scarlet, an open hearth in garden. According to her, she really needed was a place to rest, just as the fire, to burn wood with friends, sit in a circle and uniting talk on various topics.

On the creation of original and safe hearth Scarlet inspired by reading the forum and our talented, quick to fudge forum, especially kir777 who invented and embodied from the disc center vehicles (about it we still tell).

Scarlet, a sober assessment of their physical abilities, I realized that the one she can not cope, and to implement the ideas of the working Sergei invited. Commonwealth benefited from Scarlet Sergei not only somewhat modified hearth structure of the disk, but also came up with the original semicircular benches around the hearth with good back support, so friends can relax while sitting on a comfortable couch, and enjoy pleasant conversation. If friends or Scarlett have a desire to bake meat or fish on a skewer, cook the soup in the pot, then Sergey has decided to weld the disc construction of props with hooks at different levels, to be able to fix them or spit steel rod with hanging on it bowler.

And now satisfy your curiosity and start to direct the story, as the center of the disc was made.

Thus, the site was selected, put the car drive. Shovel noted place for the foundation to focus, departing from the edge of the disc circumference 20-30 cm (Distance dependent on the stone, which is laid hearth, in view of the air gap between the disk and stone). Then the turf was removed on a bayonet spade, make a small sand bag, which had been leveled, and compacted shed. It marked the center of the future source skewer stuck. And marked out the place where the drive will build on the foundation. All preparations for the manufacture of finished basement.

According to the mark edge of the disc in the series 2 has been laid firebricks. After leveling the surface of the solution inside the circle of the side walls of the refractory bricks and its further drying out, inside was filled with rubble and between the brick and the edge of the pit - a stone of different calibers (from the broken stone paving, stone, found during digging trenches for the foundation of the house, gravel). Then, under the playground center, in addition to the center with rubble, was flooded with solution and carefully aligned.

While the foundation dried up, Sergey made the two semicircular benches to further set them around the hearth.

Foundation for the center is dry, it's time for the manufacture of the hearth. For this facing brick color has been selected. The center back was raised drive to while working to maintain the distance between the brickwork and the disc. In the first row of masonry it was done ash pit for air flow.

Top masonry fitted trimmed and cut to the size of hearth flagstones, coverer besides air gap between the masonry and the disc. For rim rims were welded 10-centimeter lengths of square profile, so that later can be inserted into their rack-props under the spit and the bowler. To protect the disc from corrosion, it was painted with heat resistant paint for metal black.

Scarlet Sergei consider the possibility of cleaning of the hearth and coal ash. Not only rack-struts and welded grating may be removed from the disk to clean the hearth, but also left a small gap between the worktop limestone and drive to the last, if necessary, can be removed for inspection, or in case of burn-out to completely replace the disk with a new.

What is the biggest pleasure of the produced work, of course, enjoy the long-awaited "run the facility." And Scarlett did not insist on the fact that the center will be used only for ignition of wood, and the notion of Sergei welded to the disk structure to spit paid off in the first time. Hostess really wanted to cook on its outbreak something tasty!

Subscribe to the channel and put the "Like" so as not to miss the next release!

Do not agree with the author, or find a mistake in the article - write about it in the comments!