How to correctly planted grapes in the open ground

In a previous article, I described how to sprout cuttings vines for planting in the ground. Now tell how to properly planted cuttings into the ground.

Prepare for landing

The depth of the pit depends on the soil fertility and structure. If the ground sand, then, accordingly, a hole is dug deeper - approximately 1 meter in width and depth of 80 to 80 cm for filling it with organic material. In that case, if you have clay soil, then at the bottom you need to do drainage. In sandy soil is filled on the bottom of some clay to water when watering is not leaked directly to the ground, but slightly delayed for root nutrition.

The distance between the wells is 1.5 meters.

To add to the pit in the form of organic humus, compost (these elements should occupy half of the pit) and ash (1 L). You can also make a double superphosphate. All mix it with soil.

Landing

The container to pour the water, wait until it is absorbed, and then gently pull out the seedling. If cutting was planted in a plastic bottle, then just cut the plastic and remove the plant.

Good seedling - growth of 30-40 cm. Before planting need to harden the plant - stand on the street during the week.

Yama did not fill up by about 20 cm to the seedling was at this level for about watering convenience and protection from frost. You want to make a recess in the ground, and planted a sapling. Need to be planted in such a way that the lower the kidney of the cutting was at 3-5 cm above the ground. Pour water in an amount of one watering at 10 liters.

Then stick a stick next to the plant and secure the wire. Here's a way to have a planting grapes using cuttings.

How sprout cuttings for open groundYou can see here.

If you are interested in how to grow grapes from seedThen you read this thisarticle.

Subscribe to the channel "Country life"And put the Like!

Other useful articles can be found here.