How to wash acrylic, cast iron and old baths

Every good hostess, sooner or later on the experience learns that it is not easy to wash bath. But given how nice bath procedures to carry out in a snow-white and clean bath, everyone should at least try to clean it yourself.

Also, it should be remembered also that the purity of the bath is the most important matter of personal hygiene. So how to wash a bath?

Luckily today is available a lot of money, specifically designed for washing and bleaching baths, but not all of them are characterized by the same efficiency and not always are universal (this means that if a vehicle is easy to wash acrylic bathtub, they did not succeed wash cast-iron).

Each type of bleaching bath should be remembered about their secrets. Most subject to wear acrylic bathtubs, so for them to care properly and carefully. If you do not want to harm the beauty of its beautiful acrylic bath, remember that this material is very poorly tolerate exposure to alcohol, ammonia, hydrochloric acid and citric acid. If the bath is equipped with a hydro-massage system, the cleaning should start with the processing of the system, and only then you can move on to the bleaching bath.

To wash tubs need to buy a special detergent, sponge, rubber gloves and a pair of wax polish. Evenly apply the detergent to the entire surface of the bath composition and rinse with cold water only (if heavily soiled bath better to repeat the procedure, but does not include hot water). After such a cleaning necessary to start imparting gloss bath, what is needed cloth and polishing agent.