Errors in the construction of baths
The revival of an old Russian tradition and its popularization among the public makes many in his country mansion to begin construction of turnkey real bath. For its exterior walls are used round logs. Recommend breed coniferous trees - pine and spruce.
How to pick up the logs for a bath?
Equally important is the quality of the material for construction. Even if you pick conifers, it should consider that not every tree is suitable and, as a result of the structure may be short-lived. Experts advise ephedra from the northern regions because the wood it has a high density. Increased rate provides good water resistance of the material, ie, less moisture is absorbed. Ephedra can be applied and from the south, with a porous structure, but then be prepared that lower crown baths in a few years will start to rot. Starting an independent process, it would be desirable to take into account other people and not to make their mistakes in the construction of the bath.
Mistakes can be avoided
Foundation
Among the most serious mistakes in the construction of a bath from a bar called the poor quality of the foundation. Bath, as well as all the buildings, needs a reliable basis. This building support and it must be durable. Mandatory pre-test does not hurt. To do this, all the components are mixed at the same time. One should not disturb the order of addition:
1. Water.
2. Cement.
3. Crushed.
4. Sand.
Better use of the M-500 cement. It is mixed in a proportion of 1 to 3 or 1 to 5, which gives a high strength composition. No harm will be laying waterproofing layer being between the foundation and the lower crown bath.
furnace fittings
To avoid mistakes in the construction of the bath, the entire furnace valves must be installed at the stage of laying. Before you put it, you need to ensure the quality. All cast iron components are tested by the sound. If it is ringing, this high quality product. It is necessary to check the operation of the lock in the door of the furnace and the ash, to freely open / close doors.
The inner bath apparatus
The advantage in finishing given aspen, alder and poplar. Bath used year round and should keep warm. This issue needs to be addressed by using additional thermal insulation materials. Their use depends on the climate and temperature conditions of the region.
For heating selected red bricks without damage. In a place where the chimney passes through the roof mounted metal box. This will ensure that fire safety is very important. The distance from the chimney to the wood pieces to be 40 cm. Tube passing through the attic, painted in white color. This is necessary in order to be visible on it arising during operation chipped and damaged.
As practice shows, and experience, a mass of bugs in the construction of a bath from a bar happens and requires special attention:
- incorrect placement of doors;
- incorrect installation of the ventilation system;
- untested contents of the stove;
- low-quality wood for heating;
- illiterate lining furnaces, etc.
Full adherence to the rules will make it possible to avoid problems in the construction operation. As a result, sauna will please you for a long time, providing an opportunity to assess the healing properties of water, steam and hot stones.