Setup generator Kipor KGE12E

The task: to provide uninterrupted power supply facility in the event of a network outage.

Progress of works: To achieve the above objective it became necessary to install the generator automatically turns on when failure obscheposelkovoy network. According to the agreement with the customer, taking into account the energy of the object, as well as taking into account market prices generators, the choice was stopped at the petrol model Kipor KGE12E, with automatic run. The general form of the generator and the ATS block is presented on the photo:

Given the fact that the model of the generator is designed to operate in the open, and it was installed in a closed room households. construction, it was necessary arrangement forced air ventilation and cooling system. It is implemented by means of the supply and exhaust fans. Furthermore, for a dot undeveloped engine cooling duct system (see. Facing the front part in the photo below). Turning on and off the fan is provided with a thermostatically, remote sensor which is mounted on the head block of the engine generator set:

After installation of the generator to the installation site generator control unit (ABP) was carried out and the control cable connection produced ATS block (the block on the photo on the left of the electrical ABP):

After completing all the connections once again it was made "proring" correctness rasklyucheniya wire control cable, as well as generator tests performed in all possible modes. At present, the generator has worked for two years without any complaints.

More detailed information on progress of the works can be found in our photo gallery. The total installation and start-up time the genset was 7 days.