How to seal the hole in the wall of plasterboard?

We already wrote about what you can decorate the walls, and why we, in our work, we try to escape from the GFC and use the GPS. But today let's talk about what to do if you have a wall of plasterboard, and even formed a hole in it, spoiling the whole look. If the hole was too great for quick repairs using patches, you try to patch it this way.

Tools and materials:

1. Detector;
2. ruler or levelPencil;
3. Drywall Saw;
4. A spare piece of drywall;
5. Drill, screws;
6. Self-adhesive tape, canvas;
7. Finishing plaster, trowel;
8. sandpaper.

Process:

1. We find out where in the rack frame are on either side of the fault. This can be done with the help of detectorOr feeling the wall from the inside by hand.
2. We make pencil marks on the sides of the wall around the middle of each of the racks. Draw a line on the line - first on the sides (of the marks on the racks), and then the top and bottom of the lesions. It turns out that we seemed to have depicted the resulting hole rectangle or square.
instagram viewer
3. Take the saw to cut out the drywall and the marked part of the wall. You should now get a kind of a small window.
4. Take wooden slats and two suitable cut-to-size segment, the length of each of which must be equal to the width between the uprights.
5. Attach the top and bottom of the holes, securing the screws to the posts. They will serve as spacers, to which will be attached to pay.
6. Now cut pieces of spare drywall patch precisely suitable size cut contact portion.
7. Closing patch the hole and attach it to the posts and braces, screwing in the screws.
8. Now fasten the cut edges, will drive one or two screws outside the patch.
9. Seams are sealed with the adhesive tape.
10. Shpaklyuem place home repair putty. Wait until dry, and grind his skin.
11. To disguise the repair place, cover it with appropriate as the entire wall, paint or seal new wallpaper.