The best ideas to clean the joints of ceramic tiles

Beautiful ceramic tile in the interior - it is a luxury, comfort and pride of any owner. However, if in itself a tiled covering does not require complex care, the cleaning tile joints can deliver a lot of inconvenience. Given the urgency of this problem, we want to tell you about the most effective and affordable ways to deal with the dirt in these areas.

Despite the fact that the tiling and grouting use special mixes, complex composition comprising water-repellent and anti-fungal ingredients, none of these means is not able to provide protection against the development of mold and mold.
As a result, over time, the port is not only the aesthetic appearance of the room, because darker seams, there is mold and an unpleasant odor. Most formidable is the danger of a negative impact on the human body of the fungus and bacteria.

So, we analyze the most effective methods of cleaning tile joints.

Household chemicals.

Currently, the range of shops offers a large selection of cleaning agents, both universal and special treatment for joints. Some of these chlorinated (

"White", Domestos etc.). They perfectly removes impurities and eliminate the mold. However, the most affordable and safe oxygen bleach is considered.

Mode of application: mix bleach with water in a ratio of 1: 1, applied to the contamination area and leave for 30-60 minutes, depending on the degree of contamination. Furthermore dirt is easily removed and the surface wiped dry.

Folk remedies.

• 1 way. Take half a cup of baking soda, one-third of lemon juice and a quarter cup of vinegar (9%). All this is necessary to dissolve seven cups of warm water. Apply the mixture can be normal toothbrush or sponge. Leave the solution for 10-15 minutes. Then wash with water and dry.

• 2 method. Soda, lemon juice, mustard and toothpaste. You can also add a little ammonia. The proportions are approximately the same as in the first case.
• 3 method. For disinfection dangerous mold, a mixture which includes dining ammonia spoons, 2/3 cup of water, a teaspoon any softener and tablespoon vinegar.
  To clean seams is not necessary to use soap and alkaline solutions. They contribute to the further spread of mold and mildew.

Steam cleaning welds.

cleaning steam purifier It is one of the most effective methods. Under the influence of high temperature and pressure steam, all the dirt from the joints instantly discharged to the outside. You just wipe it with the already cleaned surface. It is the most environmentally friendly and safe way.

It is very important to choose the method and means for cleaning the joints, taking into account the type of tiles. Tile a glazed surface not tolerate ingress acids. Use of acid-based lead tarnish surface. Matte unglazed tile after cleaning welds necessary to wash well and cover the protective mastic. Glass tile and mosaics very resistant, but they can not use cleaning compositions with high concentrations of acids and alkalis. Agents containing abrasives is undesirable to use for washing any coating. Grout on the floor, you can use a mixture of epoxy, which are little soiled and not exposed to the defeat of fungus and mold.

Important! During operation, be sure to protect yourself from the effects of corrosive agents. always use gloves. Do not forget to ventilate the room where the works.

Hopefully, these tips will be useful to you!

If you do not want to spend their time cleaning and understanding into all the details of its implementation, the services of a professional cleaning can be ordered always with us:

DM-Cleaning -https://dm-cleaning.dachamaster.org

bonus:new and regular customers - provided great discounts! All the detailson our website. Go, meet, consult, order!