How to calculate the number of bricks and mortar for the furnace?

It's no secret that the construction of the furnace is already quite a lot of years, used brick. This is one of the most ancient methods of construction, but it should be noted that the stone oven preserved much longer.

How to calculate the required amount of bricks?

Before starting the installation of the furnace, it is necessary to calculate how many bricks will need to be installed.

Of course, you can contact the experts, but I advise you to understand yourself as you try once, you will realize that there is nothing complicated about the procedure.

The calculation must be taken not only laying the furnace itself, but also the chimney, as well as to take into account the fact that you have to stack bricks in several rows. But in order to calculate the number of rows, you need to know the size of the furnace.

Everyone who at least once engaged in construction works, knows that the height of the brick is sixty-five millimeters. The distance between rows is typically five millimeters. When the calculations, quantities for the chimney bricks, the magnitude of the subtracted premises 30 cm.

Once you get the number, it should be divided by the thickness of the series and in the end turned out the necessary quantity of bricks. Also, many sites have calculators that allow you to calculate the number of bricks, all you need to know: it is the height of the space, the width of the proposed furnace, the distance between the bricks. As for the solution, there is a need to comply with only one rule: use the amount of the solution, which will not go beyond the masonry. Too thick layer of the solution over time to crack and crumble, so it is best to use the minimum amount of solution for the furnace.

conclusion

In conclusion, I can tell you that you need to calculate the number of bricks as possible, given the size of the house walls, floor and ceiling. As for the solution, it is not necessary to do a lot at once. It is better to add more than to suffer with surpluses. If you follow these simple rules, you'll have to do a good stove that stand for long enough, and the materials do not have to throw away, and with them, you spend facilities.

Perhaps this article will be of interest to you:

What is the smoke sauna? I'll tell you how to prepare such a bath!

Features and Tricks masonry stoves

Properties of the heating furnace installation

Optimum width shelf in a bath