Useful content

How to make the roof of the house to keep it flowing?

click fraud protection

Erection of any structure - it is a serious and responsible, especially when it comes to residential building. Here, every little thing have to be pre-designed and takes into account the performance of work. The roof is one of the most important elements of the entire structure. It must be reliable and safe protection from wind, cold and rain. Furthermore, this additional space is often used not only as a pantry for storage of old things, but also as an attic.

Detached house with an attic floor. Photo service with Yandex pictures.
Detached house with an attic floor. Photo service with Yandex pictures.

To learn how to do the roof, it is best to know the professional builders. But if you yourself decide on this important event with their domestic helpers should carefully look into this matter. First of all, you need to stock the necessary materials. Their number and the choice depends on what kind of project you are going to implement. Anyway need rafters kontrobreshetka, lathing, insulating membranes, nails and other materials. To these wooden elements were long and were not destroyed, they need to handle antiseptic and protect from moisture. To the roof was warm and served for a long time, it should be further warmed.

instagram viewer

Driving device roof with roofing pie - metal. Picture with a service Yandeks.Kartinki.
Driving device roof with roofing pie - metal. Picture with a service Yandeks.Kartinki.

Below I will give a quick tutorial for those who want to learn how to make the roof of the house with his own hands.

Rafter system can be assembled directly on the height or the bottom if it has the structure of farms, or order ready-made farm.

How is the roof to collect on earth ???

Yes, you heard right. Before starting to work at height, heavy rafters gather in a single unit on the ground. Here it checked their stability and reliability of the connection of each element. On how to correct will be made assemblage, it will determine the future stability of the roof. After checking the structure is lifted and placed on the house.

The task is greatly facilitated if the object has a structural feature in the form of a central bearing wall extending over the entire length of the cottage. This will allow the masters, not only to reduce the time to create a roof, but will also save a lot of money.

Rafters are collected on the ground. Photo service with Yandex pictures.
Rafters are collected on the ground. Photo service with Yandex pictures.
  • An important step will be the installation of wind and waterproof membrane.
  • After mounting insulating membrane, the whole area of ​​roof system attached kontrobreshotka. Technology that provides clearance, providing good ventilation of the roofing.
  • The next stage - implementation of crates. This will require a holistic boards, free of defects or damage. The length of each should be equal to twice the distance between the rafters. Connect accounts only support. Type of flooring and sheathing step depends on what type of roof you have to build. If it is a soft roof, the crate should be solid. When installing metal lath is important to follow step. Fastening boards made using nails.
Wind-water-proof membrane, lathing and kontrobreshetka roof. Photo service with Yandex pictures.
Wind-water-proof membrane, lathing and kontrobreshetka roof. Photo service with Yandex pictures.
  • During operation, the roof should be well ventilated. Therefore it is necessary to take care that the crate remained in ventilation ducts up to 5 cm wide, two on each side.
  • Further insulated roof and paroizoliruyuschim insulating material. With stapler and twine anchoring insulation, vapor barrier membrane, and then only after that - make installation of metal.
  • At the final stage set skate. This can be done only after the roof is completely ready. The ridge is made of the same material that was used for coating. His mount is made with nails, staples or screws. Often, a skate mounted system "ventilated skate."
A roof with roofing - metal in the completed form. Picture with a service Yandeks.Kartinki.
A roof with roofing - metal in the completed form. Picture with a service Yandeks.Kartinki.

Once the roof is mounted, is filing roof overhangs. It is performed mainly by two types of materials: siding, soffit or timber linings, or simulator. Just on the sides of the roof mounted wind board. After installation, these elements set the gutter system. All along the roof overhang mounted snow stop. Particularly the attachment of different roofing elements I discuss in the next article!

Mounting the gutter and downspout funnel. Picture with a service Yandeks.Kartinki.
Mounting the gutter and downspout funnel. Picture with a service Yandeks.Kartinki.

My articles that may be of interest to you:

The technology of construction of a frame house
Pros soft roof
How to make a blind area

Why is a PVC film ceiling better than drywall

There are a lot of ceiling design options. But, you see, no one is painting the floor slab anymor...

Read More

The adopted son of Viktor Rakov wants to become an actor like a father. Relationships in a family where there is still a daughter

The adopted son of Viktor Rakov wants to become an actor like a father. Relationships in a family where there is still a daughter

We welcome those who have dropped in to see us for the light!Viktor Rakov is well known to Russia...

Read More

Induction heater, device and principle of operation

Induction heater, device and principle of operation

Today, the principle of induction heating is used quite widely and this is not only huge smelting...

Read More

Instagram story viewer