How to old wood?

There are many ways of artificial aging of wood in its structure to manifest something that will please you with its uniqueness and originality, the structure of the fibers.

Very interesting way to brushedWhich will allow you to identify the ring structure of the tree in his place saw cut. For this operation you need drill and circular karschotki. After processing the wood such devices, you make sure that the natural beauty in the tree has long laid by nature and you can only release it! For more beauty you can cover polished after polishing stain and varnish place.

Incidentally, such an artificial way to change the type of wood a lot. Consider another.

Firstly, you need to wet the wood. This operation involves lifting the pile of wood. Then you must carefully drier wood and sand. Then follow application dark water stains on the surface of the wood and a little rinse it with a wet cloth. This operation will create the effect of wood deterioration.

Then you can put on the wood surface of the artificial dents, grooves, scratches or anything else. You do not need any special tools. Will suffice: a hammer, awl, chisel, drill. All these artificially created defects will be necessary to cover the dark kind of putty. By the way, this dark putty will simulate the accumulation of dust. After all this, you can continue the process of aging of the tree. Next plot the topsheet stain to another substrate (but before we performed grinding). After all these operations absolutely necessary drying for 10 hours. Only after this the surface will be waxing along its fibers.

I would like to offer you another way of artificial aging of wood. To do this, you need the finest carnation, which are filled acetic acid. This unusual structure is to a certain time, usually within a week, insist in a dark place. I want to warn everyone that this compound will have a pungent smell and cook it better in the fresh air. After coating this composition the desired timber, on its surface, after drying, small cracks will manifest. It can be even more so to strengthen the aged effect, for this the surface of the tree cover krakelyurnym varnish. As a result of all these actions on the wood surface appear small cracks. These cracks are particularly well looked after rubbing them in a weak solution of acrylic paint dark color.

Thank you for reading this article until the end. Here are a few of my articles that may be of interest to you:

How to surprise his wife spade handles? Inspired!
Thermowood - material, time-tested!
How to bend wood