Simple and versatile tool for a circular saw

This device despite its simplicity significantly extends the capabilities of conveyers and enhances user experience on it.

adaptation device.

It arranged it simply - they are two rectangular parts, the same length and different width. They are interconnected so as to bridge the distance between them was the same as the beam parallel blade stops.

In this formulation, the angle between the tool and the table needs to be 90 degrees.

Why use this device.

I will cite only a few examples.

On this device, you can, for example, to fix clamps. On it, I fixed the L-shaped stop, which told here.

Such high support is useful in the manufacture of panels by the second method, I talked about it here.

Also, this device can work both with vertical setout carriage parts.

Fixed to the high part of the vertical bar will serve as a support in the manufacture of studs and grooves on the circular saw.

And the same bar mounted at an angle of 45 degrees will make cuts at an angle.

And it's actually not all instances where this device can be useful.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.