1750 twisted roofing screws. I thought
What takes the most time in the installation of metal? This mount it to the crate. And when you do it the first time, you will come across even with different surprises.
What could be simpler than to tighten the screws, hammer nails, etc.? Suppose time is a long time, but in complexity - it is not very intelligent processes.
But it turned out not always.
I've written about how I mounted metal roofing.
How do I deal with it, you can read these articles:
I put the first metal sheets. Nuances and mistakes without them, has not done any stage of my building.
We had to move half of the roof again. What led to this?
As far as possible to bend metal roofing, without damage? I correct their mistakes, minimal effort.
Laying metal from right to left and left to right. I checked both methods on themselves.
It had to do her final fixture.
In total, the two ramp 6 to 10 meters, it took me 7 jars of screws of 250 pieces. And tighten so many I can draw conclusions on the process.
❗ For me, the most memorable was just twisting process.
Like all the show on video tutorials:
Sheets laid, stood in the same place and at arm's length Drill all vokrug.👍
I have long remembered these "teachers" when he made it himself.
✅ The simplest self-tapping screwsAre the ones that you can spin before him, leaning on them all the weight of his body.
The longer the arm is moved to the side, so it becomes harder. And if left to the general ...
😬Postavil: Cool, cool, cool, cool, cool, cool, cool, cool, cool, cool, cool ...Articles are not enough to describe how many times had to tighten a screw. And with the hand just withers. And if in the final of all breaks down, and screw flies from the roof... Fortunately there is no limit! 🤦♂️
But not everything was so bad always. Sometimes, surprisingly, screw in the most difficult position went like clockwork.
And all of this in my opinion affects the following:
1️⃣ quality screws. Which is very different.
The sharpness of the tipWhich drills and metal, it is the key to success. But even within the same bank, the same manufacturer, gets different. But manufacturers are different.
Here I had something to compare. Actually, I originally bought 6 jars of screws, thought enough, and remain still. But it was not enough. And having bought in addition a little more, by weight, I saw a concrete difference.
Even the quality of painting was different. Some were so flooded that the head even in the screwdriver tip does not fit.
seal even approximately, it was thinner and of poorer quality.
✅ That these "Loose", I tried it, and put them aside. I had to buy another whole can of those that were originally.
For information:
- Normal quality, are Taiwan production.
- Well, the bad, sold by weight - Chinese.
2️⃣ Practice.
Even here it matters. Most of all, I was tormented with a twist on the first slope. In the second, it was much easier.
Screwdriver sits better in the hand. Hand is accustomed to such a load, and effort to make greater.
You feel like a screw is twisted. Where you need to push, where priotpustit that by not broke and did not fly away. The speed of rotation, too much depends.
In general, even such a seemingly simple process has a lot of nuances. Only practice can show them.
But in any case, the main thing - it's all real, even alone and for the first time.
But, most uncomfortable element of the roof, waiting for me to come ...
💥SUBSCRIBE TO THE CHANNEL💥 not to miss the real practice. And Like 👍 necessarily deliver. 😁