Basic errors and dangers in the construction of houses from glued beams

construction danger house of laminated veneer lumber is primarily in the fact that due to the incredible demand for the building material laminated board began to produce all and sundry. I will try to warn you of potential hazards that can occur when poor-quality construction of laminated veneer lumber, and give advice on how to do it correctly.

To comply with the right technology in the manufacture of laminated veneer lumber slats should be thoroughly dried in a special room, and then glued on a special adhesive using a press. Many are saving on similar technology, which undoubtedly makes it possible to significantly reduce the cost of construction.
⠀
But the low cost of construction in this case is not on par with the quality. And if the house will stand for a long time, built without the use of special technologies and necessary? According to our estimates, the reliable operation of this structure will be the strength of 5-10 years. Then the house, as well as any similar building made of wood, could easily be subject to shrinkage and suffer from the hard impact of external factors.

Naturally, this method of construction and operation imposes a very negative impact on the reputation of laminated veneer lumber. But to distinguish high-quality timber from outright fakes can not even most experienced builders.
After all, many people think that housing construction - this is a costly process, and in order to save decide buy materials, to seek the necessary tools, sawing, pounding, and to build the foundation of their forces.

This is a major mistake, which activates a chain of further errors of ignorance in various stages of construction of houses from glued beams. Thus, the future owner of the house on their own creates a lot of problems that could have been avoided, to see a specialist, so the squatter - a moot point. Let's take a closer look at the most common mistakes that often become household life into a nightmare.

The second mistake after the decision of self-construction is an error at the stage of foundation organizations. Why should I turn to the professionals in the construction of the foundation? ⠀

In this case it is not even about the independent construction of the foundation, as it is wholly a headache in the future. Production of wooden house designs of laminated veneer lumber is strictly on the stated customer parameters as well as the foundation - home base, which is the main load, enough to be able to mix the concrete mix or stack valves, the most important thing - a clear compliance with the size and urovnya.✔ Otherwise, you may encounter distortions foundation and further consequences of this actions. ⠀

The third mistake - a direct construction design. On the design stage of assembly house you may find that some logs do not match the size or fastened completely wrong. How could this happen when timber production was going on strictly defined criteria in the company, which we mentioned earlier? ⠀

The answer is simple - careless attitude of the company to its customers. Among the owners of the companies there is an awful opinion that, as a rule, people bought a house only once in a lifetime, so do not consider it necessary to check the timber for the presence of marriage because, in principle, the second time in the home of the client does not turn from laminated veneer lumber. Such an attitude to customers, as it did not sound sad there. ⠀

In order to avoid it, you need to contact proven in the organization of the market, providing high-quality assembly and construction. To have this as much as possible reliable information, you should examine all the available material on companies free access to examine reviews about it from customers, realized projects, the company's participation in the exhibitions.