Blades for the kitchen from wood. Gift for mother in law

This is a story about how I was doing a set of kitchen blades as a gift for mother in law.

The main tool for producing served jig machine.

To begin, I drank a drawing on the handles and blades for each basic shape.

In rounding pens made with a grinding disk to the grinder.

four subjects were planned, and they are made from different kinds of wood. Two blade with a straight edge - broad and narrow, they are made from ash. One with an oval edge of the beech. And the fourth was the subject of a spoon of birch.

Next made in narrowing blades in the working section by a planer.

I think that I have done on the softest statement is - extreme.

So I'll write at once - not repeated.

For three blades, I think it is clear. It remains their only sanded.

Spoon, I'm not cut out and were ground. The outer part of making a grinding drum on drills and sanding disc on the grinder.

The inside of a spoon made using bormashinki.

There used diamond blade only as a basis. On top of it imposed from the drive nazhdachki.

Blades and spoon ready, it's time to make a stand.

It I also cut out on a jig machine.

I made of birch. Supply was made of three parts: a lower base, an upper blade holder and a central rod.

Holder drank quadrilateral, each side made a hole where cemented dowel so it could hang the blade.

The central core was placed on the Fraser, just as made for the progam in stool this article.

Then all this was going, and waxing.

Here's a dial.

Below you can see a video with an overview of the manufacturing process.

Mother-in-law happy gift and uses it for the second year.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.