Three unusual transactions on the circular saw: surface planer, milling and grinding.

The circular saw is often the very first machine in the workshop. And in my workshop I was the first machine circular saw, and made out of hand-held circular saws, as set out in the table.

This homemade machine I reworked several times until he came to a decision that serves me now, and this is almost 4 years. This decision, I wrote here. There you can download the installation drawings in the table saws, including drawings of the rip fence.

In his workshop tools I acquired gradually, so there is used for unusual transactions.

For example using a circular saw can be edge jointing boards. Here, the saw blade is used instead of a knife jointer. You need only a supplement to the rip fence to drive for part of the fence is flush with the outer edge of the blade.

Learn more about how this works can be found in this publication.

Also circular saw may in some situations be noted router. If the rebate application or production slots of the circular saw is quite obvious, here figured sample for the saw - is a matter of unusual.

Still, with the help of a circular saw can be milled. Moreover, the form for which is not always there, and milling.

For more information about how to mill using a circular saw can be see here.

Another unusual step for a circular saw - grinding. For the first time I have discovered that this can be - it's when he met with the calibration-grinding discs for circular saws. Such discs can be bought in specialty stores, such as cmt-shop.ru.

The idea intrigued me and decided to try grinding with conveyers.

For more information on this process, the use of conveyers can be found in this article.

Examples unusual use of the circular saw shown here. Although the tool is very versatile, and with the help of various devices can significantly increase the ability to use this machine.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.