"Steel beaver." I feel nozzle with a strange name.

Wanted to dispense with scraps of metal, and made all the butt... On receiving extra problems.

I still continue to close the roof. And though it has two ramp completely sewn, the work has not yet ended.

Or rather there is a new and unexpected poser.

In my first article about the laying of metal, I mentioned that there were difficulties with the alignment sheet on the ridge.

With this, I did it. But when I began to sew up the second ramp, there was another difficulty in this place.

✅ ridge width of the metal, not enoughTo close the distance between the sheets. I do not know what I expected everything, but the fact remains. Literally 5-7 centimeters on each side ...

Nothing to do, you need to lengthen.

I had to buy another few sheets. I took the smallest, to be able to bring. But I had them cut into narrow strips. And here the question arose of what to do.

❗ Just say no grinder, which of course the easiest way to do this. But when cutting, it causes severe damage to the entire protective layer sheet, burning it sparks. Therefore, a special tool is needed.

Experience with metal scissors, I had When I mounted the Cornice strip. Very uncomfortable, and with such a large volume of work, I do not do it.

So I acquired a special nozzle for cutting metallocharepitsy, with a funny name "Steel beaver". And its price, was like a high-quality scissors for metal, in the region of 1500 rubles.

But how much of it good ...

attachment point is that it does not cut, and metal prosekaet small areas. And due to this, it turns out, the cut line. Simple principle, but at the same time:

• No sparks.
• No deformations.
• And the cut line can be of any shape. In fact, like a jigsaw.

The sheets, which have to be cut, I marked out on the necessary details.

And cut, painted edge special enamel for metal (about it I I wrote this article).

All simple and easy, no effort.

✅ only had to fix each sheet clamps, so that they did not leave. There was no one to keep... 😁

Therefore, the money spent, this tip does not feel sorry, very good thing, which is, I think, is still useful.

This was what, it was:

But the process of installation of these pieces - this is another story.

💥SUBSCRIBE TO THE CHANNEL💥Not to miss, and put the Huskies 👍.