Useful content

Laying metal from right to left and left to right. I checked both methods on themselves.

click fraud protection

Slip sheet or put on top of overlapping? That's what I thought until I came to the point. As a result, it was necessary to do so and so, and again, not of their own accord ...

And so, one slope of the roof I have covered. With errors and rework, and its nuances, but it's done.

But there is one thing that got out at the end of the installation of the ramp.

In the article "We had to move half of the roof again. What led to this?", I mentioned this unpleasant surprise.

When it came to an end, I'm afraid, if the edge of the sheet aligns with the edge of the batten. Although everything was measured ten times, uncertainty still present: just to have enough sheets to the end battens.

But it turned out the opposite.

It turned out that the last sheet hung from the crates.

How come I'm now understand about:

No need to take "useful width of the sheet"Which is specified by the manufacturer, or seller, for the truth. It is necessary to start from the concrete sheets, which lie in front of you, not on the computer screen.
instagram viewer

As a result, there was a poser ...

Since I was putting this slope from right to left, making the overlap on the packed row, and came to the result, then doing the same on the other slope, I get a "hanging edge" on another pediment.

Of course, you can start already making it droop, but it will come at the other end, I was not sure.

Therefore, I decided to start a second ramp, with the same edge as the first (at least on the front side and then will not have to suffer).

Only now it was necessary to slip sheets.

On the one hand it seems to be very uncomfortable, but in fact it was not too much difficulty.

  • When the overlap is on the list, it is necessary to securely hold until prisverlish.
  • And in the case when the sheet is palmed off under the previous one, it can be said holds himself.

βœ…V my work, the difficulty was only in the corner joints.

Slipping right topsheet, it is necessary to cater to lower right, and left under the two.

But this thing just takes a bit of practice, and everything becomes easy.

❗ And given the previous experience, trial and error, the ramp was laid much faster.

If at first with all the adventures, it took me four incomplete days, the second we completely made for two. The first day together, just have thrown all the sheets, catching a few screws. And on the second, I finally prisverlil.

Given all this, I can say that much of a difference in the methods of styling I have not noticed. And and that can be used depending on the situation, and the other.

And now I do make sure that even minimal experience is of great importance.

πŸ’₯SUBSCRIBE TO THE CHANNELπŸ’₯ and put the Huskies πŸ‘. I study and gain experience further.

How to grow lilies. the secrets of growing

How to grow lilies. the secrets of growing

Some truckers have problems with the cultivation of roses. And they fertilize them well and look...

Read More

5 most of the key trends in design in 2018 !?

5 most of the key trends in design in 2018 !?

Continued ... 4. "Floating" bed!Not only attractive to the eye but also a unique style, "floating...

Read More

Hives from Epps - pros and cons

Hives from Epps - pros and cons

New materials, which have long been in the world they rule the construction of houses for the peo...

Read More

Instagram story viewer