Adaptation of the three required for desktop conveyers

Speaking of the table circular saw, I mean as a factory table saws and homemade. For example, I use a manual circular saw mounted on a table. See how it's done and you can download drawings here.

Normal operations on the circular saw - it sawing longitudinal, transverse and sawing cut at an angle. On factory machines tools for such operations usually are included. Although not always complete devices are comfortable ...

And then take a look at the three options for self-made for the necessary adaptations Facing, longitudinal saw and miter.

for miter usually use the slide, often in the form of a "trough" - plywood with a guide and limiting bars front and rear.

Another variant of the slide - a one stop.

Accurately trim parts at right angles and do cross the slots. And if you tilt the saw blade, you can trim and angle.

Read more about the device and manufacture of the slide can be see here.

For longitudinal saw of course use the rip fence. An embodiment of such stop that you can quickly fix and may be installed on either side of the saw blade can be see here.

There is also an idea for making this stop you can see an article about quick-guide.

Additionally, when longitudinal sawing can not do without pushers. One option to quickly make a plunger for conveyers see here.

Of course there are other tools that are used for longitudinal sawing, for example when you need to do bevels on legs

Concerning miter, There is a good helper angle stop.

How to make a stop see here. There you can download a protractor template.

Conclusions.

The above-mentioned device, perhaps a necessary minimum set for circular saw, so that you can effectively use the machine features.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.