Example of the filler improvised router for assembly dowels

In a previous publication was reviewed device homemade pad, which makes the filler of a conventional mill. View article can here.

Here is an example of the use of this device for the assembly of wood products in the dowels.

I collected on the dowel's a sofa.

He was made in the autumn of 2015. Lately nowhere and nothing has fallen off and not come unstuck.

And then look at using an improvised prisadochnika for fixing the arm to the side-bar.

On the arm makes a mark for the first hole.

Pushes perpendicular abutment 30 mm - this is half the thickness of the armrest that the hole in the middle.

I adjust the drilling depth.

After these settings armrest clamp secured to the bench and drill the first hole on the previously deposited around, focusing on the risk in the window fixtures.

Next, install the guide dowel in the area.

I note the width of the side-bar to extra holes not nasverlit.

And further, the guide dowel inserted into the first bore hole and drill the next. Next, move the dowel into the hole and drill a new following. So the full width of side-bar. 200 mm I went six holes.

Then adjust the device drilling in the end tsargi - 10 mm because the thickness of the side-bar 20 mm.

Here I use the limiter for drilling the first hole.

As used restrictor bar 20 mm thick. It centered drilled hole for the dowel guide.

This bar dress on dowel mounted to far from the cutter center hole. From the cutter center has measured 20 mm, said the size on the bar and took it. Now pressing the bar, wearing on dowel device, receive a first opening at a distance of 20 mm from the edge.

Also on the side-bar made a mark - with the edge of the 20 mm drill bit, drilling to the other end of the hole is symmetric.

After the first hole is drilled, the guide is placed and then drilled dowel holes with a spacing of 32 mm, which gives it a guide dowel.

It turns out the same series of six holes as well as on the arm.

Here is the connection goes. very reliable and durable.

This couch frame pre-assembled on the boring machine without glue.

To make it more clear how this device is used suggest to look small video clip.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.