The most common variants of decoration of the facade of the house of aerated concrete

Hello, friends! Today will tell you about the decoration of the house of aerated concrete, as many gardeners like to build their own houses from this material. The walls of the concrete blocks are rough variant and require finishing on the outside and inside.

ceramic tiles

This high-strength artificial stone produced from shale. Decorating of house facade of aerated ceramic tiles gives the structure a sophisticated look and high performance characteristics. Frost resistance, fire resistance, dielectricity, hygiene, environmental friendliness.

SIDING

Finishing facade of the house is also possible from the aerated concrete siding - modern facing material, which is widely used in the arrangement of the facades of buildings of any type and size. The service life of the facade of a given material depends on its type. But the only thing that should be followed in any case - it is the use of high quality materials. Finishing facade of the house of aerated concrete siding can be done in two ways ✌️: vertical and horizontal. ⠀

BRICK

Finishing facade of the house of aerated concrete bricks improves aesthetic perception of the building, because of the wide range of colors can be pick up a brick, which will not only be perfectly combined with a landscape design, but also to maximize its to complement. In this case, not an ordinary bricks are used (to avoid additional load on the foundation), and a special cladding which undergoes cutting work in production.

A ROCK

Finishing facade of the house of aerated concrete stone structure gives the original external parameters. This material does not require careful maintenance, but in addition it has a high resistance to frequent temperature changes and various atmospheric vozdeystviyam☝️V as "stone" for facing home use marble, slate, granite, limestone.

Imitators strips or block house

Finishing facade of the house of aerated concrete beam simulator, Block House, often performed by a wooden crate. Pre façade insulated with mineral wool. It is important not to forget about the vapor barrier membrane and the air gap, in order to avoid the occurrence of condensation. Sam simulator timber blockhouse and is mounted on the finishing nails, which are driven into the groove profile for concealed installation. But this method has both supporters and opponents.
⠀
And in conclusion, facing the house of aerated concrete important enough, is responsible! And most importantly, a necessary procedure. Since the material is never used as a final layer, it necessarily requires finishing. Because it is important to choose the right trim. Each of the above facade of building materials has its advantages and drawbacks, and, despite the differences in production methods and production methods, they share one very important factor - the quality performance.

Thank you for reading the article to the end! Put Like, if liked the article.

Subscribe to my RSS feed to keep out new and interesting articles.