Do not dispose of cans! Useful homemade Workshop

Seemingly ordinary cans... What are they needed for? Throw them in the trash and forget about them. But do not do it, because the cans are an excellent resource for the production of a variety of DIY! Of them can make a bunch of useful things, such as pencil holders, candlestick or vase. Yet they can bake cakes for Easter or just to grow the seedlings. In general, the ideas very much!

In this article I will share with you another useful homebrew twig from cans, which will be used in the workshop or garage. The cans are ideal for storing various small things, but it in the studio, as you know, very much.

For today's home-made, we need 4 - 6 cans (can be more), a piece of plastic pipe, several fasteners for pipes (Fasteners-clips), bolts or screws, nuts and washers.

The first step is to make smooth edges on all banks not to accidentally cut yourself. Make it very simple. We take the pliers, grab behind the sharp edge and tear it to the top. And then just remove the sharp metal strip. In banks, ring opening, it is enough to press the sharp edge of the pliers.

Then my cans, remove the label and dry them. When banks prepared drill holes in them, away from the top 2 cm.

Now fasten the clip to the banks by means of screws. Perfectly suited M4 or M6 screws 12 mm in length. If you have the screws (bolts) of greater length, then it is desirable to cut them so that they do not much stuck inside a tin can.

Insert the screw and fasten it with a screwdriver while holding the finger nut on the inside of the can. Five minutes and clip fastened.

Now it is small left. Attached to the wall of his workshop or garage several clips at the same level. The last clip fastened at a distance equal to the length of the tube and a clip fastened in the middle. Then insert tube (20 mm diameter) and fix it with screws.

Everything is mounted on the pipe cans. Some 15-20 minutes and our home-made ready. Now, conventional banks are a great place to store all the little things: self-tapping screws, nails, nuts and so on. They will not take place on the table, as well as they can be easily removed and emptied the contents. If you wish, cans can be painted to make them more presentable.