Shtroblenie walls under wiring

dimple surface is not very difficult for wiring, but, indeed, time-consuming process. They may need to perform during the overhaul of the apartment, as well as, if necessary, Transfer old outlet or switch to a new location, creating an additional connection point appliances. Shtroblenie walls under wiring always associated with the presence of sufficiently large amounts of dust. To avoid contamination of the apartment, worth curtained entrance to the premises where the work will be carried out, a cloth or old sheets.

Be sure to check for hidden cables along the entire length of future laying and washing. It should also be from the outset to determine the power project and only then start preparing the walls. If you prepare a detailed wiring diagram indicating the locations of all the sockets and switches, in the end do not have to expend effort to eliminate the annoying bugs. What tools are needed for shtrobleniya walls? It - Building roulette, level, pencil and chisel, hammer, hammer, wall chaser, or a Bulgarian with a diamond disc. Go to work at height may require the presence of a stable ladder or stand.

The process of preparing the walls has some nuances and its own rules. The cheapest, but the most time-consuming of all the methods is carried out using a chisel and hammer building. At the same time, it would require too much effort. In addition, there is a real risk of a rough Stroebe. The application will create a perforator shtroblenie by wiring much faster, however, and this method does not help to make a smooth groove. Cheap and fast is the one that uses Bulgarian. With it, the edge is obtained straightforward enough, but dust will be much greater than in the two previous cases.

To perform this work, there is also a special construction unit. Wall chaser easily cope with the task, but its cost in comparison with other tools, is quite high. Getting to the top of the work, be sure to evaluate the state of the walls and the material from which they are made. Shtroblenie concrete walls for wiring in the panel house it is particularly difficult. Run it with just one hammer and chisel is almost impossible. It is much more correct and better take the more powerful equipment. If the walls of the room are made of less durable materials, suitable as a chisel. Walls first sputtered along the edge marked furrows, then deepening to 25 mm.

Puncher and can easily cope with the concrete pavement. two nozzles can be used in this instrument. Holes desired depth initially performed using a drill, and then attached vane connecting holes honey using a furrow. If the punch blade is stuck in concrete - an article which is painted in detail the way about how to pull the blade. Deepening the walls for guiding dust possibly with the use of the punch, however, and he will not be able to cope with even the furrows line. Bulgarian Stroebe as concrete and brick walls. This will require a diamond blade, with which should be performed along the entire line of two, arranged in parallel, the inscription. Subsequently, the inner part is cleaned with a chisel.

After final readiness furrows, their purified from excess dust with a brush, and primed. Then, the cabling and its consolidation. Subsequently furrow in its entirety, is sealed with plaster or gypsum. Shtroblenie walls for laying wiring fairly easy task if you follow all the rules given.

Thank you for you for reading this article to the end!

In order not to miss new articles subscribe to the channel!

Like put, if this post was helpful to you!