Prekrytie own hands. So far, the easiest step on my construction site.
Here is another case is closed. It's time to sharing the results of ...
❗ Having already many stages, from cutting down trees in the overgrown plot to build a house, I do not get tired of every time to enjoy the work done.
And often it happened that with some trifle namuchalas more than a great and important work. Here and overlapping, only in reverse.
✅ would seem big and important step, was more or less easily and rapidly (but of course, there were some nuances).
Swipe.
This is in comparison to the masonry of aerated concrete, which I was doing before.
When I was working with blocks, then by the end of the wall, quite tired of the monotony and uniformity. And further, the blocks seem smaller and heavier, and endless time.
With overlapping everything went much faster. Here you can in one day to make a significant part of (and if you know what to do, it may be all the work).
You can do the same.
This is just for me. Of course, when there is an assistant, then perfect at all. But like the rest of the building, where I handled myself.
The most severe was this drag on top of the board for the ceiling beams. 50 200. And all the rest is already familiar.
If you have a project, there is no general problem. But this is not my option.
The main thing is that I braked - is thinking and thinking and conjecturing. It always bothers me, but nowhere without this samostroyschiku.
Of course, when there is a specific plan, then all the faster at times, even if the work is done for the first time.
And I had to compensate for the lack of experience of brainstorming.
- Step beams, length and number.
- View of fasteners and size.
- Strengthening and improvement.
And a lot of small things that appeared out of nowhere, but that, as always, decide ...
✅ And then, some of my decisions, about which I wrote in my articles, so many readers did not like, and some even advise all carry:
Problems of long span in the hardwood floor. I decide the matter without unnecessary costs.
I put a beam on the studs. An unusual way to make holes using a grinder.
My beam does not need calculation! Unnecessary risk, or a logical decision?
But only time will tell the truth.
And at the moment, I do not like, and this is important.
💥SUBSCRIBE TO THE CHANNEL💥and put the Huskies 👍. Builds on ...