An interesting new way to drill at right angles to the normal drill!

In the last article we looked at 4 method, such as drilling at a right angle using a conventional drill or screwdriver. I experimented with metal corners, mirrors and connecting nut. The theme has become quite discussed and one of my readers suggested a completely new and exciting way to drill at an angle of 90 degrees. Of course, I decided to test it and to share their findings and opinion.

For this process, we need a bubble level, which will need to be installed on the drill. I must say that it was difficult to buy. None of it was not building shops. I found it only in the store where they sold cameras and accessories. The price of such a level of only 80 rubles.

And so as to drill a hole at a right angle through the bubble level, it must be secured so that the level of the plane parallel to the plane of a drill chuck or screwdriver. To this end abutted against the cartridge and anchoring in desk top drill bubble level (screwdriver) by a conventional double-sided tape.

At the same time we expose the level so that the bubble was clearly at the center of the circle. If you install a bubble level on the screwdriver, then for ease of installation the battery can be removed, so that the instrument is not bent.

When the level is set, the drill insert and guided by the bubble begin drilling the hole. Here the most important thing, so as not shaking hand.

Hold the vial at the center of the circle when drilling was not so difficult as I thought. In the end result of this process I was very pleased. Hole happened almost strictly a right angle.

However, this method is not without flaws, make it work, when installing the bubble level on the drill and drilling into time, The surface on which you work must be strictly horizontal.

But in spite of this disadvantage, the method is even working, and the result is nothing worse than using a metal bracket or the nut, and therefore, can someone of you have it handy. Write in the comments your opinion and subscribe to the channel "Podelkin".