Simple and "modern" gripe: from the old sill with his own hands

Metal works are often made with a vise. With their help, you can greatly speed up and facilitate the work produced.

However, not everyone has the opportunity to acquire a good vise, so the author of the invention may well be of interest to artists and mechanics.

(How does this work will show at the end, please read carefully)

**the new hero of the review on instruments made with their own hands**

In today's article I would like to tell you about a simple grip from the old sill their own hands. I will try to give a comprehensive evaluation, which will give the most complete picture of this instrument.

Idea

Grade 5 of 5

As I've said work in the metal workshop without the aid of the grip will be difficult. Thanks to this device can be attached to the item and easily handle it or cut it.

The process of preparing the assembly: the production of preform

At present, our industry produces various types of clutches in different price ranges. Therefore, buy a vise there is no trouble.

I would not call this idea of an innovative and unique, but as for making available materials have been proposed, I bet the author of 3 points.
instagram viewer

Design

Grade 5 of 5

The design of the grip their own hands It consists of fixed and moving parts.

The assembly process of one of the main parts of the grip angle and the metal plate

The fixed part consists of a metal plate which is screwed to the housing by bolts. The housing is made of two parts welded to the wide metal plate. The housing is obtained such a size that it freely passed through channel. Also, the plate in the base of the housing are welded several nuts.

To the end sill plate is welded to an opening of such size that passed through a metal rod and a threaded nut screwed into the base body.

Prepared blank for the grip with your hands ready for painting

Next, the jaws are made. For this cut plate 2 trapezoidal shape, which are welded to parts made of rolled square section. After that, one of these parts is welded to the base, and the other - to u.

As used cheeks rectangular metal plate. Some of them are welded to the jaws, and the other after the application of incisions are bolted to the first.

For convenience, a threaded rod welded handle.

In my view vise design a highly reliable and long stroke jaws allow clamping overall detail. Therefore, for the design I put 5 points.

Design

Grade 5 of 5

The author painted toolAnd anvil polished to a mirror finish, so that the product has an attractive appearance. For this, I put the author 5 points.

Parts for assembling the grip with his hands after painting of channel

analogs

Evaluation 4 of 5

Analogues simple vise from the old sill are bench screw industrial production. Their price starts from 1500 rubles.

I believe that the author has made very high quality tool from scrap materials. Therefore, due to budget savings I put the author of 4 points.

Total

Grade 19 20

Simple clutches of the old sill their own hands gaining 19 points out of 20. In my opinion, this tool it will be convenient to use, and its production will not take a lot of time and money.