Wood-concrete bath! Part 5. Wet facade.

Despite the excellent performance of thermal insulation of walls arbolita, when applying the facade we made additional insulation facade mineral wool, 100 mm thick. As well as this, we have leveled the surface of the walls. Wool fastened to a standard glue and dowels Belleville. Before installation, carefully primed surface primed walls.

Since the experience with wood-concrete blocks, we had the first time, before installing insulation, conducted tests on fixing mineral wool against the wall of wood-concrete blocks, performing all of the technology. Primer, glue and dowels Belleville showed the same reliable fastening of cotton as well as on the wall of aerated concrete.

After warming facade, we primed surface prior to application of the adhesive layer. The second stage Construction of a "wet facade" includes applying the reinforcing layer. The reinforcing layer - a layer of glue facade, facade scholochestoykaya steklotkannaya mesh and another layer of glue. applying simple technology. First depositing a first layer of adhesive on the surface otruntovannuyu advance, then until the glue has dried fasten mesh smoothing trowel it slightly pushing in the glue.

All corners, window and door openings protect additional uglozaschitnym steklotkannoy profile with mesh for facade work. And then we put a grid over the second layer of adhesive, which we further align the plane walls, eliminate all minor variations.

That final fasadanyh work, we turn to the application of the structural layer of plaster "bark beetle". Prior to the application of this layer, we primed the wall is another primer, quartz, to increase adhesion to the surface layer of plaster. The very composition we took the ready, already involved in cans of 25 kg. The fraction of the filler was 2 mm. Method of applying a plaster much and not to cause to much negative comment I will not tell what method we took advantage of. The result was many times better and more interesting than the standard method, in my opinion.

We have picked up in advance and agreed with the customer desired color and zakolerovali entire batch of finished structural plaster. But not everything is running smoothly. On one wall was made mistake which led to a partial structural alteration plaster layer. Due to this point, we did not have one structural plaster banks and it had to go buy. After the elimination of defects and when the wall is completely dry, we found the difference in shades. A place that is isolated and altered quite conspicuous.

I had to go for facade paint, tinting it in the color you want to do to paint the walls before painting. Once we have seen that the shade of paint is the same with what we need. We completely repainted one wall. The facade was ready!

Place Like if it was interesting. Write in the comments, whether you have experience in the construction of wood-concrete blocks?

Subscribe to my RSS feed, so as not to miss the next article - continuation of the story of the construction of "wood-concrete bath"!