Holes in mauerlat. Problems in the work with the drills that I have no idea.

Drill a hole, it would seem that could be easier? But when it comes down to it, it is not always easily obtained.

I already wrote about I was tormented with the installation mauerlat. But in the article I wrote about the main hemorrhoids, which has been in this work.

Make a hole in the mauerlat - not an easy task.

Frankly, I expected that there will be problems with the inconvenience of working at height, but more trouble I brought the instrument itself, rather drill.

Perov drill.

❗ This is the first and, as I thought the only option that I have tried. How much I have not seen examples all bored by him.

But on the first hole, it took half of the 50th board and the problems started. Namely, it has almost stopped drilling. I have it sharpened... Another hole is normal, and then the same story.

Of course as is the case in this drill. Yet the price of 70 rubles does not give hope for a good result. But I think the other thing (more on that later).

To suffer a little bit, I immediately realized that this will not do. And he bought more.

Auger drill.

Well, I thought, with the device for five minutes, I drilled all that is possible. But it was not there...

✅ charge these 40 cm. in a drill she just stood up as soon as the drill came into the tree. Of course I assumed that power may not be enough, but not so soon. And then it dawned on me, it happened because at the end of the drill bit.

Of course, if the tool is enough power, this "tip" helps in drilling, and pressure on the drill is not necessary. But to me he just disturbed.

Of course it was possible to simply cut, but not enough to be useful. So I simply drilled a small hole in the usual first 10-m drill, and then passed these hefty. Thus borax nothing to be walked on, and everything was normal.

But there was one thing.

Despite the fact that it was a matter, it is still drilling was hard, even a little bit. And the reason for everything, it seems to me - it is raw wood.

It just sticks to drill and clog the grooves do not normally pass on giving.

❗ The same reason could have an influence on the work of the pore drill. Perhaps this is why I, and having all these problems.

👆 But initially, of course, my inexperience led to everything. All the same, every time I am convinced that in the construction as much detail, about all that on YouTube do not look, and many have to learn the hard way.

But if it was all easy, it would not be interesting!

💥Subscribe to KANAL💥 and put the Huskies 👍. Fun continues ...