Simple manual cutter for steel sheet with his own hands - an overview
This review will introduce you to truly amazing invention that can be made with your own hands. To be honest, I often have to prune rolled metal: corrugated board, evroshtaketnik or tides. (How does this work will show at the end)
As a rule, before I have used for these purposes, tool - "steel beaver", this is such a special attachment for drills. But the fact that the author suggested, I was really surprised.
On review cutter for steel coils with their own hands, let's try to make out more detail this thing, whether it deserves a place in our garage.
And before you start, I would like to recommend to you my services for applications in the construction and repair: Choose your city and the type of services the first 30 days of the receipt of orders, only 1 ruble, try it!
Idea
Grade 5 of 5
As I wrote at the beginning, I was really quite often have to deal with a rolled profiled metal.
We have to cut corrugated board, evroshtaketnika trim strips, shorten flow, but do not exactly special tool pretty hard.
Previously, I used metal shears, but the cut is obtained very curve, then I started to use a nozzle on the drill "steel beaver."
The author also offers a fairly simple way to do this tooltheir own handsTo be honest, the idea of Bravo! Let's look further ...
Design
Grade 5 of 5
The construction of such a complex at first glance, the tool is surprisingly quite simple. The author of this invention uses a small metal plate and the washer diameter of about 25-30 mm.
Evaluating the cutter roll construction steel like again note the simplicity and speed of assembly tool using such constructive solutions. It remains unclear until one point, as a thick steel can penetrate the invention.
Usually profiled sheet or evroshtaketnika has a thickness of 0.5 mm., Starting from this, such a tool should be sufficient. For a simple solution to solve complex problems, the author receives 5 points!
The only thing in this instrument with your hands, I would not use slippery plastic handle and rubberized, but it is not so critical.
Design
Evaluation 2 of 5
Due to the plastic handle from PVC pipe cutter to get at least some kind of appearance. Unfortunately, the metal plate was left unpainted.
analogs
Grade 5 of 5
Analogues of this device certainly exist on some I have written above. This metal scissors head "steel beaver", but it is worth the money and which are not small.
For example, shears for steel will cost you about 1000 rubles, a nozzle on the drill or screwdriver will cost 2000 rubles example.
Take into account the relatively higher cost toolIf you need to cut once the sheet metal, it makes sense to do their own hands. For cost-effective solution author receives 5 out of 5 points.
Total
Cutter for sheet metal with their hands gaining 17 out of 20 points. I want to add that this is really homemade, which deserves not only attention, but also in its repetition garage.
video source and images for the critical review: https://www.youtube.com/watch? v = WQgvqo-_82M