The slit in the laminate. How to eliminate it in Germany and Russia

Bed laminate. It takes several months (and maybe more). Joints and a gap appears. Owners of expensive Eurorepair situation is not familiar. But with the budget or materials not subject to installation technology - a typical case.

Prepared enough flat surface. Locks cheap laminate could not stand the load and left. The gap is striking. Everyday. Strains. Even the dirt in it stuffed. If water gets - joint swells. But do not raise the same because one entire floor slats. I'll tell you how to cope with this problem in the West and in our country.

In Germany, they call a trained person with a specially made device! It looks quite tricky. The basis of the barn hinges. On the one hand the smooth ground, the other is glued cork toe (so as not to give the floor is not scratched god). Overturn - special impact ending. Handsomely. Effectively. And how come we have?

In Russia, a neighbor called Vasya. Or a couple of months his wife copulated brain husband. If you're lucky - he repairs. With the help of available tools, hammer, tape and some mothers. But the process itself, in both cases it takes about the same scenario.

German glues on flat ground to adapt their special (!) Double-sided tape. The reverse side of adhesive tape sticks to the laminate. Several blows to the damping knob and lamella falls into place.

Our man goes to the balcony. He finds a scrap piece of wood, which he kept specially for the occasion. Glue it on the double-sided tape to the floor in a problematic location. A couple of strokes - the effect is achieved.

Write in the comments what repair option you choose? And when you consider that one is free, and for the second will have to pay 50 Euro?

Thanks for reading and subscribe to a channel. Health, success and successful repairs!