Overview of inverter welding machine Resanta AIS 190

When I moved to a small village, it is very quickly realized that the economy simply can not do without the welding machine. Literally in a private home for a year of life, I had to go to a neighbor for help in welding works ten times: podvarit shovel redo the drill, make a hole in the pipe of the heating system and so Further. It is so to say not very convenient, and a neighbor from the human need to thank. When I was planning to put a fence (cook there had to be many), then without hesitation decided to buy a welding machine and do it all himself.

I'm not particularly versed in welding machines, knew only that there is a welding transformers, rectifiers, inverters and semi-automatic. Therefore, before buying read the information on forums, reviews looked at different models of sites and realized that the best choice is welding inverter, since it is inexpensive, easy to use, it has a low weight and can operate in unstable network. In the end, my choice stopped on the inverter welding machine Resanta AIS 190.

Its price in the range 6000 - 6500 rubles. It comes without a case study in an ordinary cardboard box.

Equipment.

The kit includes: himself welder Electrode cable with 2 m long cable with Clem grounding length of 1.5 m and a passport to the instruction manual.

Main characteristics.

• maximum capacity - 5.5 kW;
• It has a low weight, weight - 4.7 kg;
• maximum current - 190 A;
• operating voltage from 140 to 260;
• maximum diameter of the electrode is 5 mm;
• duration at the maximum load current - 70% (continuous during operation of the inverter at ten minute cycle of 7 minutes, the unit needs to cool for 3 minutes..);
• open circuit voltage - 85 V;
• arc voltage - 27.6 V.

Welding apparatus equipped with functions of "anti-sticking" - is stuck at the electrode is automatically current reduction and "hot start" - produces an automatic increase in current, which provides a better ignition arc.

The front panel knob welding current, two indicators: "Network" and "overheating", as well as power terminals for connection +/- cable Electrode (+) and the ground cable (-).

The welding current can be adjusted from 10 to 190 A. The current is set depending on the diameter of the electrode (max 5mm). 5-a-boo, I have not tried it, but it takes a 4-ku peace.

Work welder temperature range is from -10 to +40 degrees. The rear panel and the cooling fan on / off button.

Dignity.

• low price;
• maximum diameter of the electrode is 5 mm;
• light weight (allows you to move the device across the area of ​​the work undertaken);
• easy ignition of the arc;
• ease of use (even my wife the first time got to do a couple of joints);
• automatic protection against overheating.

Disadvantages.

In principle, the shortcomings are not so much:

• Included was no welding mask, unlike many other devices, but it's a small minus, as the most simple mask can be bought for 200 rubles;
• short strap system, but it is also a trifle;
• the biggest disadvantage is that the mass derzhak thin (a little over half a year went bankrupt) and very short cables (2 and 1.5 m), during the operation was not always easy to work. Therefore it is better to replace them eventually.

Total.

Despite some shortcomings of the welding machine I am completely happy with his work. Although I do not have much experience in welding me this phone very much. Starts quickly, without problems ignites the electrodes 2,5 and 4 mm, keeps well drawdown voltage. With his help I was able to carry out a decent amount of work and have made a fence, teeter and a lot of little things. Making a fence, he told me fully paid off. I use it a second season and I think it will last even a single year!