Original Frame for Valentine's Day with their own hands.

Very soon there will come the holiday Valentine's Day. All lovers will exchange gifts and confess your love to your mate. In today's article I will tell you how you can make an original photo frame, which will be a good additional gifts on this day.

As an example, I'll use just such a picture frame.

For the manufacture of picture frames, you will need:

1. Plywood - 6 - 8 mm.

2. Screwdriver.

3. Jigsaw.

4. Thick cardboard.

5. Scissors.

6. Sandpaper.

First of all we need to glue pattern (pattern can be taken online or draw yourself) on the plywood and drill a hole in the ground where it will cut out the inner part.

When the preparatory phase is ready to begin cutting out frames (for cutting can use the manual or electrical fret saw, jigsaw machine or nichrome cutter).

I got here such a small workpiece. It can be said is almost ready photo frame. It remains only to find a way to insert photos.

To prevent pictures that do not stick and we had the opportunity to change them, we will do the following:

Drank three boxes of plywood, the dimensions of which will coincide with our photo frames.

And cut out of thick cardboard strips (2 - 3 mm in width).

Now glue on each of the frames of the strip. Glue needed on three sides as shown in the photo (the side without leaving the strip) and glue on top of the rectangles of plywood.

You should end up like this.

Now, with his side can freely insert and remove photos.

That's all picture frame is ready!

I hope you had fun and you can make a gift with your hands easily. All a Happy Valentine's Day, love and be loved!

Subscribe to the channel "Podelkin"And do not forget to put Laika!