How to make a simple and reliable stool. Part 1. Project

Wishes to describe in detail how to make a stool, it was enough, so start.

Let me remind you, here I talked about a robust lightweight stool, which is the test of time and heavy loads and has proven its reliability.

First, consider the project and make a list of components required for manufacture.

Here, as you can see, there are four types of parts: seat, leg, side-bar and progam.

Consider the details of this project.

Tsargami is a rail on which the ends of the studs are made "dovetail"

Accordingly, the legs are made are the same grooves.

Sami legs are made with two bevels on the inside of the legs, and a semi-circular milling is done on the outside.

Progam - it's just a round sticks. A seat is a square board with milling around on the front side.

Now make a list of parts that are needed for the production of stools.

The seat - board size 320h320h20 mm - 1 pc.

Leg - bar size 430h40h40mm - 4 pcs.

Architrave - dimensions dosochki 220h70h20 mm - 4 pcs.

Progam - bar sizes 19h19h220 mm - 4 pcs.

tsargi size determined by the distance between the legs - 200 mm plus twice the magnitude of the spike. To "dovetail" spike of 10 mm for this product is sufficient.

So, what details do already clear, but how do we consider in the following publications.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

P.SThe second part of