As to the circular saw to make a decorative cover
Connect two decorative slats crosswise, what could be simpler... when you know how to do it.
Next, I suggest to look the way of such a compound using a circular saw.
So there is a task to connect the two rail with milling.
To milling on the spot converged connection, you need to do gash under 45 degrees, so do markup - the external borders of the rack width - Saw is set at 45, and the cutting depth is adjusted by milling.
Further cuts are made on a marking on the details. Cuts I made using a pushrod guide in the table conveyers and accuracy made the marks on the plunger.
All this work I was doing on his universal workbench.
A separately and in detail about the installation manual circular saw in the table can be found in this article - Sawing machines from manual conveyers. Blueprints
As a result, should get here such cuts.
Next you need to remove the timber inside cuts. I did it with the help of conveyers in several passes. Samples are obtained in the form of trapezoids. It remains to make a sample of wood flooring in these parts from different sides. This can also be done with a saw. Disc saw blade set at an angle of 90 degrees and kerf depth set up to half the part thickness.
Propylene sequences do the sample into one piece with one hand between the previously made bevels.
In the second part we do the same sample on the other hand.
As a result of all these manipulations we get the two pieces with the samples.
If done carefully, the compound is obtained as "excellent".
For a better understanding and clarity, offer to see a short video.
Thank you for reading and... until the next publication.
I will be glad of your support in the form of a husky and a subscription to the channel.
Alexander.
On a note:
All articles of this channel is based on materialsmysite -"Joinery"
Other publications in the channel:
Whether to follow the advice of carpenters from YouTube
How quickly do a simple miter box
What can be made of old boards
How to make a long clamp for a few minutes.