Back to life a dull saw on aerated concrete. In a minute. without zatochki.😮

Thanks to my readers for their valuable advice. For such a beginner like me, a beginner is very important.

My stock of building knowledge replenishedAnd many I feel in practice. In one article, "The reverse side of "fragile" aerated concrete. Metal wear on the material." I wrote about the deterioration of different instruments, and in particular about the saw on aerated concrete.

❗ Teeth grind off well, and saw quite become a problem.

And one man told me to just dissolve the teeth from a handsaw, and do not even need to sharpen.

✅ At first I did not take it seriously, but one day, I ...Bothered to cut each block such efforts.

It's time to try.

I took a piece of rebar, and simply inserted between the teeth and spreading them, walked around the web.

Prior to that, the teeth, and so were divorced, but hardly visible. After this procedure, the wiring has become very noticeable.

Of course you need not to overdo it, everything in moderation.

Try the case.

😲I miracle, saws like new.And really, I'm not exaggerating. The only thing that propyl became a little wider than before. But these are trifles.

Thank you for your valuable advice. 🔹Subscribe to KANAL🔹and put the Huskies. With your help, the construction is moving forward.